The bathroom decoration is the most complicated. The smoothness and safety of waterways and circuits are very high, and the space materials are required to be non-slip and moisture-proof. It is very troublesome to repair the bathroom twice, so the first decoration must be done well. Xiaobian here Collected 9 principles of bathroom decoration, to help owners and friends who are currently or will be constructing to learn!
1. Ceiling: Because the moisture in the bathroom is relatively heavy, it is necessary to choose materials that are waterproof, anti-corrosion, and anti-rust.
2. Ground: Before laying the floor tiles, be sure to do a good job of waterproofing; after the tiles are laid, ensure that the brick surface has a drainage slope (generally about 1% is appropriate), and the slope is facing the floor drain; the ground must be done after the tiles are laid. For the closed water experiment, the time must be guaranteed for at least 24 hours; when laying floor tiles, pay attention to the joints and alignment with the wall tiles to ensure the overall sense of the entire bathroom, so as to avoid visually cluttered impressions.
3. Wall: The tiles on the wall should also be moisture-proof and waterproof, and the tiles must be flat and aligned with the floor tiles to ensure the integrity of the wall and the ground; if the outlet of the water supply pipe is encountered , The incision of the tile should be small and appropriate, so that the flange cover on the water feeder can cover the incision, making the appearance perfect.
4. Doors and windows: It is best to have windows in the bathroom to facilitate ventilation; if there are no windows, pay special attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door boundary should be slightly higher than the inside of the bathroom; the gap between the door of the bathroom and the ground should be larger to facilitate the return air; Make a layer of waterproofing between the floor tiles.
5. Circuit laying: The wire joints in the bathroom must be hung with tin, and waterproof tape and insulating tape must be wrapped successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have moisture-proof boxes, and the location It also depends on the size and location of the electrical appliance to ensure convenient and reasonable use.
6. Waterway transformation: It is best not to make too many changes to the water supply and drainage lines in the bathroom. If you want to change it, it should be determined according to the specific situation. For example, the location of the upper and lower water will be different if the model of the washing machine is different.
7. Sanitary ware installation: It is best to remember the distance between the drain holes before the decoration, and select the bathtub, bath room, toilet, wash basin and other sanitary ware according to the size, so as not to be inappropriate in size during the decoration; The mud is sealed well, and then fixed with expansion screws or glass glue, so that it is easy to repair when the toilet is blocked.
8. Ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must be equipped with a retrograde gate to prevent dirty air from flowing backwards.
9. Greening: add vitality. The bathroom should not be a corner that is forgotten by green. When decorating, you can choose some shade-tolerant and humidity-loving potted plants to place in the bathroom to make the place more lively.
