In recent years, with the continuous improvement of people’s living and production levels, the faucet is updated very quickly, from the appearance of design, functional role compared to the previous have a very big difference, there are a variety of novel, fully functional faucet products. Faucet as a switch mainly used to control the size of the water flow, open when you need to use water, do not need to use when closed, with the effect of saving water. Faucet is one of our most commonly used tools, learn how to disassemble it is quite important, the following small to introduce.
A, preparation work
Before replacing the faucet, I will first close the water inlet valve off. The inlet valve is located under the kitchen countertop. However, according to my understanding, if the valve is not closed or can not be closed can work with water, but in the installation of the new faucet to first use raw material with the thread direction around 7-8 turns in advance to prepare (around the less easy to seepage), the water pipe below to prepare a large bucket to receive water to prevent waste; In addition, can not close the valve must open the new faucet and other faucet shunt decompression ready.
Second, disassemble the faucet
1. Separate the inlet pipe and hose
First, use a wrench to separate the inlet pipe and hose. Bathroom into the pipe is open pipe, with the hand can be shaken, in the disassembly of fear of accidentally broke. So when disassembling, be especially careful, hold the water pipe with your left hand, twist the wrench with your right hand, and easily separate the two.
2. Separate the faucet and basin
Remove the faucet fixings, so that the faucet can be removed from the basin. But this is where the problem arises. The hose of the faucet has been in use for a very long time, so the hose has become brittle, and the fixings have rusted, so it is completely impossible to unscrew with a wrench.
3. Sawing off the interface with a saw
Because of the small space under the basin, it is difficult to operate. And the glass glue between the basin and the countertop has long failed, so the basin can be easily removed from the countertop. After the basin is removed, the construction will not be in the way. Then use a saw to cut off the rusty hard to take down the part, the faucet is successfully disassembled.
We know that before dismantling the faucet must be prepared, and the process of dismantling the faucet also has some knowledge that we must learn, the above is about these aspects of the introduction, I believe that it will help you. With the emergence of various faucet products on the market, we should consider all aspects before buying a faucet, such as its material, function, shape, price and so on. The faucet’s range of application is extremely wide, such as star hotels, homes, hotels, public places, hospitals and other places. So mastering the relevant disassembly method is also extremely helpful to us.
