Everyone may not pay much attention to the cleaning of the shower. There will be some problems when the shower is used for a long time. If the shower does not produce water, it is not necessarily broken, but it may be blocked by scale accumulated for a long time. Therefore, if you encounter this kind of problem, you only need to clean the shower head. The following editor will introduce to you what to do if the shower head is blocked and how to clean the shower head.
What to do if the shower head is blocked How to clean the shower head (pictures from the Internet)
What should I do if the shower head is blocked?
1. With acupuncture
If some of the small holes of the shower at home are blocked, you can turn on the shower head at this time to see which small holes of the shower do not produce water. Then we can prepare a needle, and use the needle to pierce the impurity in the small hole without water until there is no impurity in the hole.
2. Soak in vinegar
If the shower head is blocked, it is recommended to use acidification and dust removal method to solve the problem of shower blockage at this time. It is advisable to pour the vinegar into the basin so that the shower head can be submerged. After soaking in vinegar for ten minutes, the scale in the shower head can be removed.
3. Use lubricant
If the metal of the shower head is rusted, lubricant can be used at this time to separate the rusted layer from the metal layer, so that the rusted part and the metal contact surface, and leave a protective film. Let the shower never rust.
How to clean the shower head
1. The first method is to clean with white vinegar, mix one-to-one white vinegar and water, and then soak the shower in the prepared water for about 1 hour. This method is not only effective, but also simple, because white vinegar has Very good at removing stains.
2. The second method is more complicated to clean. The shower head needs to be disassembled and cleaned. Plastic shower heads can be unscrewed directly, but it takes a lot of force to disassemble. After unscrewing, carefully clean the filter screen and water outlet. Install it after cleaning. If it is a metal shower head, it cannot be unscrewed by hand, and tools are needed to remove it. After disassembly, each water outlet hole should be cleaned. After cleaning, you can soak it with white vinegar.
