Drying room is a lot of large houses have some functional areas, it is because of this, many people in the use of drying room when there is a sealed drying room how to discharge the humidity, the following Xiaobian and everyone together to see how to discharge the sealed drying room.
How to drain moisture from sealed drying room
1, lime moisture absorption method: lime is a good and simple adsorbent, 1 kg of lime can absorb about 0.3 kg of water in the air, available cloth or sack wrapped lime placed everywhere in the room, so that indoor air to keep dry
2. Air conditioning dehumidification method: Although this move is feasible, it is better to use less in order to save energy.
3, electrical moisture-proof method: color TV can often be in standby state, but also can be used by electricity and wind often through the hole behind the machine up and down the dust and moisture in the machine; Washing machine is best not placed in the bathroom and other water vapor density, but also the washing machine position pad high; Although the air conditioning has the function of dehumidification, but the wet days should also be opened irregularly for a while to keep it in good condition; Computer especially to do moisture-proof, the best practice is to turn on often, it is best to open an hour a day to keep dry, do not frequently use the computer, should also open the case in the inner wall affixed with a few packages of food bags in the desiccant.
Do you need cold air for drying room
The drying room is to be drained by cold air.
As a drying process, the basic principle is to raise the air temperature through the heating device, reduce the partial pressure of air and water molecules, establish the pressure difference between the air and the water molecules of the materials to be dried, and exhaust water into the air through the pressure difference.
When is the best time for drying room moisture
If your drying room has its own dehumidifier, replace it with a high-powered one. If no dehumidifier is available, add a dehumidifier. Air is usually supplied from the heating area to blow the dry fresh air from outside into the drying chamber. Then cut a dehumidifier from the higher humidity part of the drying room. If the circulating air in the drying room blows from the bottom to the top, you need to open the top, and vice versa.
