If the interface of the lamp is loose, you can remove the lamp and reinstall it; if the electronic components inside the lamp are damaged, you need to remove the original lamp and replace it with a new lamp; if there is a problem with the wiring at home, you need to reconnect them. up.
1. It is possible that the lamp is not installed properly. For example, if the connector of the lamp is loose, it will cause poor contact and the light will flicker. You can remove the lamp and install it again.
2. If the light at home is still flickering after replacing the lamp, it may be a problem with the wiring at home. It is necessary to check whether the live wire and neutral wire at the switch socket are reversed or whether the wires at the terminals are loose. If the wires are reversed or loose, reconnecting them will do the trick.
3. If there are no problems with the lamps and lines, the flickering of the lamps may be caused by unstable voltage in the home. Too many electrical appliances in the home may cause unstable voltage. Try to avoid using too many electrical appliances at the same time. If the voltage in your home is unstable for a long time, you can report it to the local power supply bureau and ask professionals to check and repair it.
4. It may also be caused by the aging of the lamp port and poor contact. It is necessary to rule out the problem of power measurement. Modern energy-saving small lamps without ballasts are flickering due to poor contact or short circuit caused by the lamp socket being used for too long. It is necessary to find out whether it is a problem of lamp socket aging and replace it in a timely manner.
