HOMENews

How to install a single hole faucet water leakage how to do

How to install a single hole faucet water leakage how to do

2022-12-23 05:12:54

The bathroom is a place we often use, and it also attracts the attention of many people during house decoration. Regarding the details of the installation of hardware pendants in the bathroom, the decoration rookie must have a little knowledge. Today, let’s share with you the installation method and precautions of bathroom pendants.

How to install bathroom accessories

1. Determine the installation position of the pendant and mark it down. In order to achieve the best effect, it is best to avoid installing on the wall stud; 2. After determining the installation point, mark the position of the screw hole corresponding to the installation of the pendant base on the installation pad;

3. Drill a hole at the marked point of the screw hole. The diameter of the punched hole is preferably slightly larger than the diameter of the screw, leaving a little space for easy installation;

4. Insert the plastic expansion tube into the drilled hole, and then tighten the base with endless dry screws;

5. Put the pendant on the base, and tighten the screws to fix the pendant.

Precautions for installation of bathroom pendants

The installation of hardware pendants is generally done after the tiles are laid. It is recommended to ask a professional master to install them, so as not to drill holes in the tiles and crack the tiles, and the loss outweighs the gain. Pay attention to the location of the bathroom accessories as well. The following is an introduction to the location of the bathroom accessories:

1. Towel rack: It is mainly installed outside the bathtub, with a height of about 1.8 meters from the ground, two-tiered.

2. Double pole towel rack: about 1.6 meters above the ground, it can be installed on an empty wall closer to the sink.

3. Single pole towel rack: It is about 1.5 meters above the ground when installed alone, and it can also be installed with double pole towel racks.

4. Single cup holder, double cup holder: it is best to install on the wall on the side of the sink, so that it is convenient to place brushing cups.

5. Toilet brush: It is best to install it on the left side of the toilet, and the height from the ground is generally 20cm.

6. Ashtray: Ashtrays are generally installed on the right side of the toilet for easy dusting.

7. Soap net: The soap net can be installed on the inner wall of the bathroom, and it can be taken at hand when bathing.

8. Makeup stand: installed above the sink and below the mirror. It is advisable to be 30 cm away from the sink.

9. Clothes hook: It is best to install it on the wall outside the bathroom, because it is usually used to hang clothes when bathing, and the bathroom is humid, so it is basically impossible to install the clothes hook inside. The most suitable height is about 1.7 meters from the ground.

10. Rag hook: Install it in an inconspicuous place in the bathroom, generally 50 cm from the ground, so as not to reduce the aesthetics of the bathroom.