As an indispensable appliance in modern life, the toilet is gradually replacing the traditional way of life and work. The toilet is loved by people for its fast, convenient and clean features. However, many families have some loopholes in the installation of the toilet, which leads to various problems in the daily use of the toilet. So how to install the toilet is one thing every family must know, so that the toilet can be used for a long time without any problems.
In terms of the installation of the toilet, there are not only high requirements for the seat toilet, but also high requirements for the pipeline under the toilet. First of all, when purchasing toilet sewage pipes, you must choose pipes stipulated by the state. The inner wall is smooth, flat, without bubbles, and without obvious cracks. Only such pipes can be used normally for a long time. If you choose inferior pipelines, it will be a very troublesome thing to repair in the future. In principle, in the installation of sewage pipes, it is necessary to adopt a 45-degree bevel angle when connecting the sewage horizontal pipe and the vertical pipe, which is conducive to the discharge of sewage.
On the issue of how to install the toilet, the hidden rotation of the pipeline is solved, and the toilet is also a key point. Before installing the toilet, the user needs to carefully check whether there are silt and other blockages in the pipeline, and take out the things that will cause blockage in the pipeline before installing the toilet, so as to reduce some troubles in the future. Regarding the installation position of the toilet, it must be aligned with the interface of the pipeline, so that the sewage can be removed most quickly and effectively, and the user can determine the installation position of the bottom of the toilet in advance, use a drilling machine to make a hole, and then install the toilet The installation will make the accuracy the highest.
In addition, the connection between the toilet and the pipeline is also a key point. The user can install a special sealing ring for the toilet at the sewage pipe opening in advance, and then connect. Of course, another method on the market is to put a circle of cement slurry on the mouth of the sewage pipe. It should be noted that the ratio of cement to sand is 1:3, so as to achieve the best sealing to the greatest extent.
After the toilet is bonded, it needs to be placed for a few days before it touches the water, so that it can be used for a long time without affecting the tightness of the toilet.
