First, how to install shower faucet
1, open the water source, clear the impurities in the water supply pipeline.
2. Install the bend pipe on the wall outlet joint with a wrench (Wrap plastic bag on the teeth of the inlet elbow to prevent water leakage, and then put the flange into the outlet of the elbow foot, and rotate it close to the wall.
3. Install the plastic gasket in the faucet nut and connect it with the curved foot on the wall.
4. The customer installs the fixed seat of the shower head according to the installation height of his specific needs. When installing the fixed seat, the fixed seat installation chassis is placed on the wall first, the punching position is drawn with a pencil, and the hole is punched on the wall with an electric hammer.
5. Take out the hand shower and hose link, and connect the other end of the hose with the faucet, put the hand shower on the fixed seat, installation is complete.
Second, how to remove the shower faucet
1, first close the main water valve, and then the faucet handle has a red and blue mark of about 8 mm, buckle down, loosen the fixing screw counterclockwise with a flat-head screwdriver, take down the handle, open the spool of the faucet with a adjustable wrench, open the upper part of the gland with a wrench, and take out the ceramic spool inside.
2, first close the total water valve, you can use a screwdriver to insert the faucet handle, pry up and down, to pry, slowly, force evenly and stable, so that you can take off the spool.
3. Close the main water valve first, unscrew the blue lid on the right handle, loosen the screws inside with a Phillips screwdriver, take down the handle, and then unscrew the spool with an adjustable wrench.
It can be seen that the installation of the shower faucet needs to pay attention to steps, such as installing the fixed base of the shower shower according to their specific needs of the installation height, the installation of the fixed base installation chassis on the wall, draw the hole position with a pencil, drill the hole on the wall with an electric hammer, (the hole depth can be put into the installation of the gecko) lock the screw and install the fixed base.
