Shower, also known as showerhead, was originally a device for watering flowers, potted plants and other plants. Later, some people converted it into a shower device, making it a common bathroom supplies.
First, how to install the shower
1, see the shower installation instructions.
2, the left and right up and down measurement size, find the best location to install the shower.
3, according to the specific height, draw the shower need to be installed on the wall, height and so on.
4, according to the position just done, make holes on the wall.
5, the accessories in the circular bottom cover with screws on the wall, screw not tight, may cause the shower in the future use of falling off.
6. Install the shower pole on the wall, stabilize the above fixed point first, and then fix the position below.
7, after determining the internal Angle screws of the fixed point above are all screwed in, and then carefully adjusted.
8. Tighten the hose sleeve of the shower head and install the handheld shower head.
Second, how to disassemble the shower
First of all, for a simple shower, directly turn counterclockwise and unscrew it. Followed by a more complex shower, you need to open with the help of something, you need to use a blade to flower the circular cover in the shower, and then use a screwdriver to open it, and finally use water to clean the shower, and use a screwdriver to screw it.
It can be seen that the shower head installation needs to pay attention to steps, such as tightening the circular bottom cover of the accessories on the wall with screws, which may cause the shower to fall off in future use. Be sure to pay attention to the relevant details to avoid self-defeating.
