Bathroom cabinets are generally installed by professionals. If there is no professional installation, a little carelessness will cause unnecessary losses to you. We have prepared relevant content about the installation of bathroom cabinets for your reference, hoping to help you.
1. Installation method of the main cabinet
1. Wall-mounted bathroom main cabinet: Select the wall to be installed according to the hole position on the back wall of the cabinet, but the height of the counter surface from the ground is between 80-82CM, and use an impact drill to punch holes in the wall. Install the accessory plastic expansion in the cabinet into the hole, and then lock the main cabinet and the wall with self-tapping screws. After the main cabinet is installed, align the basin with the wooden bar of the cabinet and adjust it to be flat.
2. Floor-standing bathroom main cabinet: Take the cabinet body and components out of the packing box, screw the cabinet legs and components on the fixing piece through double-ended screws, and then lay the cabinet flat and place it in an appropriate position.
Second, the auxiliary cabinet (shelf):
The installation method is the same as that of the wall-mounted bathroom master cabinet.
3. Bathroom mirror:
First, according to the positions of the two holes on the back of the mirror, determine the positions of the two holes on the wall above the main cabinet with a suitable bitmap, but the size of the bottom end of the mirror and the top of the main cabinet is between 23-28CM, and then punch the holes and screw on the self- screw, so that the mirror can be installed.
4. Other matters:
1. The design and installation of the sewer pipe: Before installing the bathroom cabinet, you must consider whether it is wall drainage or floor drainage. If it is wall drainage, the reserved hole on the wall of the sewer pipe should be between 50-55CM from the ground, and For the middle of the cabinet, as long as the ground drainage holes are reserved in the middle of the cabinet, but not too far from the wall.
2. Water inlet pipe: As long as the outlet of the hot and cold water inlet pipe is in the middle of the cabinet, it should be between 45-50cm from the ground or a little higher.
3. Mirror front light: If you need to install a mirror front light, the outlet of the wire should be about 200CM from the ground, and placed in the middle of the bathroom cabinet.
5. Matters needing attention and maintenance:
1. Keep the air circulation in the bathroom.
2. Please avoid placing cabinets and mirrors directly on the ground during installation, and place them on soft objects, such as cardboard.
3. During the installation process, pay attention to prevent metal objects such as screwdrivers from scratching the protective layer on the surface of the cabinet.
