Nowadays, many people like to go home and take a good shower in the face of the summer heat, so even if there is a bathtub now, few people wash it, mainly because it is inconvenient, and secondly because it is a waste of water. Since people like to take a shower, we should understand the installation of the shower room, we will introduce how to install the shower room.
The whole shower room is not very big, of course, you can set your own size, there is a saying that “although the sparrow is small, everything is complete”, the whole shower room is just like that, it has hooks for towels, hanging baskets for hair washing and bathing, double doors for sliding, rosette head, and of course, ventilation holes for changing air.
If you want to use the luxury type that function is a layer up, such as: steaming, massage, listening to music, mirrors, etc.. With so many functions, the price is definitely not expensive.
Most of the overall shower room sizes for ordinary households will be around 900mm-1000mm. This size is definitely enough for bathing, and there are many shapes of shower rooms, round, square and rectangular, all of which are suitable, and there are many shapes of doors, so you can follow your own preferences.
Some times multi-functional is not as practical as you think, in real life you may not use certain functions, but the lure of multi-functional is mostly tempting to you, so you have the desire to buy, I hope you can hold back Oh!
The installation of the shower is very important, it uses glass is generally tempered glass, be careful when assembling.
The installation is to ensure that the wheels of the door are smooth, if not smooth, you can apply some oil, and to clean up the garbage in the track in time to prevent jamming (do not pull hard when jammed so that the door does not fall off). Since the shower is generally tempered glass, do not knock the corner of the glass to prevent it from breaking. The above are the precautions to take when assembling.
Next, I will introduce the installation method. First of all, we determine the location (we should consider it well before we set it, otherwise it will be a trouble to modify it afterwards), and connect the water outlet of the base of the shower through the water pipe, don’t think it’s good to be connected, we should try to see if it will leak first. Then we fix it on the wall (different screwdrivers should be used here), and after fixing it, use the glue gun to seal the gap to prevent it from being a little cold in the shower, but the main thing is safety. Then you can seal the top. We have to power on first to see if it works, if you can, you can use glass glue to seal around the water outlet.
This is what we have prepared for you about how to install the shower, hope it will help you.
