The emergence of showers has brought convenience to our lives. The shower brackets we bought are all installed by the staff. How to disassemble them if we install them by ourselves? Let’s talk about them below.
How to install the shower bracket
The water outlet joints of the hot and cold water pipes are 1/2-inch universal caliber, preferably R1/2″ tapered threaded joints, the left is hot water, and the right is cold water; the distance between the centers of the joints is about 15 cm, and the height of the joints from the ground 60 cm is recommended.
How to install the shower bracket
①. Install two shower hangers. It is recommended that one of the shower hangers be 1.2 meters above the ground and the other be 1.8 meters.
②. Put the decorative cup into the thread of the shower bracket first. After wrapping the raw material tape, screw the left and right shower brackets into the joints of the hot and cold water pipes respectively.
③. Adjust the distance between the front ends of the left and right shower brackets to 9 cm, and the height is the same, and the distance from the wall is the same.
④. Put the water-stop gasket into the water inlet hole behind the faucet body, and then install the shower faucet on the shower bracket.
⑤. Install the nozzle.
⑥ Install the shower pipe and shower head. Go to some small commodity wholesale markets. There are merchants who specialize in selling concept household items. There is a product that is specially sucked on the tiles and can be placed in the shower.
How to disassemble the shower bracket
There are various types of shower heads, and the design of each shower head is different, so the disassembly methods of different shower heads are also different. Most of the shower head adopts a movable design, and it can be unscrewed by gently turning the rotation button of the shower; the design of some shower heads is relatively complicated, which requires the use of tools to remove the shower head; And the design of some shower heads cannot be disassembled at all.
