Wooden flooring has been popular in recent years, but some people say that when the interior decoration, wooden flooring sometimes tears the skin phenomenon. So why does the wood flooring rip the skin? How can we ensure that the wood flooring is not torn when we install it? Here’s a look with me.
1, decoration steps to be reasonable
Floor laying is commonly started after the completion of the wall, carpentry, oiling and other processes, so as to avoid damage to the floor during the construction of other projects.
Before laying the floor to want to do a good job of clearing the air, clear off the air of cement, putty, to ensure that the air is smooth, to ensure that the air is no sand and gravel particles remain after doing moisture control measures, you can start to do the floor laying.
2, moisture-proof measures to do enough
Floor paving before the waterproofing and moisture control measures must be sufficient, near the kitchen and bathroom space more attention. Waterproof material should be coated evenly, assuming that there are gaps to fill with cement. Close to the water pipe to brush on 30cm high waterproof material. In addition to waterproof material, you can also lay a layer of waterproof paper under the floor, near the wall, but also leave the location of the skirting.
3、Floor paving to paint
After the floor is laid, but also to the floor brush a layer of floor paint, from time to time to discontinue polishing on wax. As the floor is often worn, brush floor paint and polishing and waxing is conducive to maintaining the floor, extending the life of the floor, cleaning will also be relatively easy.
4、Floor laying time has been careful
The basic material of the floor is natural wood, whether it is solid wood flooring, laminate wood flooring, or composite wood flooring, wood on the temperature and humidity of the plea are relatively high.
Spring and autumn temperature and humidity is more appropriate, the summer temperature is high, the floor laid to the fall and winter is easy to thermal expansion and contraction and other physical elements incurred deformation cracking; winter temperature is low, the floor is relatively monotonous, to spring and summer will be due to moisture absorption incurred shrinkage bulge.
5, in addition to the seasonal elements, floor laying temperature should be adhered to between 16 ℃ to 30 ℃, this temperature allows the wood to adhere to the natural state, floor laying equipment work time is best to avoid the noon and evening, as far as possible after two o’clock in the afternoon, this point in time temperature and humidity is the most suitable for the day.
