In our daily life, sometimes there will be the phenomenon of Yin Angle cracking, Yin Angle cracking not only affects the quality of daily life, but also affects the beauty of the room, what is the cause of Yin Angle cracking? We should first find out the root cause and cure the problem. How can we fix it? Follow me to find out.
Negative Angle cracking is shown here
First, what kind of impact can Yin Angle cracking produce?
If it is found that the wall of the home is cracked, if the error is relatively large, you can see at a glance, this has had an effect on the home appearance, but it will also lead to the furniture in the later installation, the display is not smooth, and the room space itself is very limited, if it is found that the shadow Angle cracking, it will also cause the waste of room space, To have such a big effect because of a small problem is a bit of a pyrrhic loss.
Remedial effect of negative Angle cracking
Second, what is the reason for the emergence of such Yin Angle cracking?
If the negative Angle of the wall is found to be cracked, it may be caused by the following two reasons:
1, decoration material problems caused by Yin Angle cracks.
Treatment method: The problem of Yin Angle cracking, if it is very serious, it will be very difficult to repair, if not, it is to be removed and dismantled again.
2, in the decoration of the construction process problems, may be in the decoration, there is no good tape, may also be in the plaster seam, the use of glue problems, glue deterioration or too much water, or the wall is not clean up and other problems.
Treatment: If it is such a local problem, it can be repaired, and it is good to use latex to fill it.
Remedial effect of negative Angle cracking
Third, how to carry out the acceptance of the negative Angle, to avoid the problem of negative Angle cracking?
In the process of acceptance, we need to use the following two tools for acceptance:
1. The square of Yin and Yang is detected
The square of Yin and Yang can detect the right Angle deviation inside and outside the Angle of Yin and Yang, it is a relatively common tool. We can use the multifunctional internal and external right Angle detection ruler to measure the (Yin and Yang) right Angle inside and outside the wall to check its deviation. Generally, the common plastered wall deviation value is about 4mm, and the brick surface deviation is about 2mm. When we are in use, pull out the adjustable ruler, rotate 270 degrees, and let the pointer align with the position of “0”, and then measure against the position of the Yin and Yang Angle. After measurement, the reading on the measuring ruler can be read out, and the value indicated by the pointer can be called the vertical deviation of the measured surface.
2, laser marking instrument detection of straightness
If we want to check whether the negative Angle is straight or not, we can use laser marking instrument to detect. You can follow the vertical line made by the concentrator, insert the Yin and Yang Angle line and the vertical line is coincidence, if it is coincidence, it means that the treatment of the Yin and Yang Angle is qualified.
