After the shower has been used for a period of time, the water flow will not be smooth. At this time, it can be solved without changing the shower. You only need to remove the shower and clean it. Let me tell you how to disassemble and clean it. shower method.
How to disassemble the shower correctly
After the shower has been used for a period of time, it is natural that the water flow will not be smooth. This does not mean that the shower head (shower head) is broken. Don’t worry, you don’t need to buy a new one. This is mainly due to the scale clogging after long-term water discharge. You only need to disassemble and clean the shower head (shower head). . Many people may find it troublesome to hear disassembly and cleaning, but the operation is actually very simple and not very troublesome. The shower head (shower head) is nothing more than a water outlet cover and a handle. If your home can adjust the size of the water, most of them have a software ring in the middle. You tighten it tightly and then rotate it counterclockwise (or clockwise). Just pull it out. If your home is non-adjustable water size, it is basically impossible to disassemble, because most of them are welded tightly by plastic welding (ultrasonic).
How to disassemble and clean the head shower
We can use white vinegar to clean the shower head (shower head), which is also commonly used in the family. After we remove the shower head, put it in a small basin filled with white vinegar and soak it for an appropriate time, usually two to three hours. After soaking Scrub with a toothbrush, and then clean it with clean water; but when cleaning the shower head (shower head), pay special attention not to use strong acid (preferably white vinegar), so as not to cause strong corrosion on the shower head. Scrub with a sliced lemon if there is hard water deposits.
In order to ensure that the nozzle is not clogged, it is best to clean the shower head every six months or less, so that you no longer have to worry about the nozzle being blocked suddenly when taking a bath, which will affect your pleasant mood when taking a bath. At the same time, in order to ensure the service life of the shower head (shower head), it is best not to place it directly under the Yuba when installing, and the distance from the Yuba is preferably more than 60cm, and often use a soft cloth to stick a little flour to wipe the surface of the shower. So as to protect the shower.
If the shower in your home is still in good condition, you should not take it lightly, and start with prevention. It is necessary to develop a good habit of showering and bathing in normal times. Before the end of each shower, use a towel to clean the shower outlet of the shower to prevent limescale from remaining. This is not only hygienic but also prolongs the service life of the shower, so why not. In addition, if your shower has been used for a long time, it is recommended to replace it with a new one. This is not only for safety considerations, but also to better remove bacteria. The money that should be spent is still spent, so that it can be better for your safety.
