Glutinous rice glue is a very environmentally friendly adhesive. When sticking the wall cloth, we see the use of glutinous rice glue. It will not let the wall cloth change color, nor will there be an unpleasant smell, and it is relatively easy to clean. But when the wall cloth is brushed with glutinous rice glue, it is inevitable that there will be glue overflow, which will affect the appearance of the wall cloth when it is cured. So how to remove the sticky rice glue on the wall cloth?
First, how to remove the glutinous rice glue offset print on the wall cloth
1. If the glue stain is not completely dried, it can be wiped several times with a clean cloth containing alcohol (preferably anhydrous alcohol).
2. Put the banana on the glue stain. After about 10 minutes, the glue stain becomes soft and can be easily wiped off with a razor blade, but the smell of the banana water is a bit pungent, so wear a mask during the operation.
3 with acetone wipe effect is also very good, the amount is less, clean thoroughly. Best of all, it can remove these residual gums very quickly and easily, thus saving time and effort. Wear a mask and rubber gloves when handling.
4. Squeeze some hand cream onto the glue stain and wipe it slowly with your thumb, rubbing it for a while will remove all the sticky glue. Hand cream is a grease that is incompatible with glue.
Two, how to remove the glue of wall cloth
1. If there are spilled glue marks on the wall cloth and it is not completely dried, we can choose sponge to wipe the glue marks after wetting with water, but we should pay attention to wipe in a small range, not all wipe, otherwise the contaminated area will become larger.
2. If it is dry, you can choose the glue remover and then evenly apply the material to the offset printing area. Wait a while until completely dissolved. Then, we can wipe with a clean cloth to effectively eliminate the offset, leaving no marks.
Three, stick wall cloth sticky rice glue how to tune
Before mixing glutinous rice glue, make sure that the bucket and mixing tools are clean. Before adding water, use a blender to disperse the glutinous rice glue and adjust it to the shape of wire drawing. This will help the glutinous rice glue fully absorb water during the mixing process, and the glue is even and does not produce particles. Add water 3 times, stir thoroughly and dilute each time, until the glutinous rice glue is evenly pulped, there are no particles or clumps, and the glue and water are completely integrated. Please note that the consistency of glue should be determined according to the material of wallpaper wall cloth, climate, temperature, humidity and the degree of glue absorption on the wall, and the glue proportion should not be too thin.
