The induction faucet not only has good water saving effect, but also has a certain decorative effect, so it is loved by consumers. However, because the use of the induction faucet requires a battery, it is necessary to replace the battery after a period of use. How to replace the battery of the induction faucet? ?What are the maintenance methods for the induction faucet? Let’s find out with me below.
How to replace the battery of the induction faucet? This article will teach you! _1
(Photo source: Golden Sanitary Ware official website, invaded and deleted)
1. How to replace the battery of the induction faucet?
1. The distance between the sensing window facing down and the bottom of the sink should be at least 25CM.
2. Close the water source at the water inlet where the product will be installed.
3. Open the packaging box and there is a faucet body inside. Wrap the thread of the water inlet on the faucet body with raw material tape or anti-leakage glue, and screw the faucet body into the fixed position on the wall where the water inlet pipe is to be installed.
4. Disassemble the battery box cover on the protruding part of the top cover above the induction faucet body, carefully pull out the battery box inside, and put 4 new AA alkaline batteries into the positive and negative poles of the battery according to the instructions, and then the faucet body will The red light on the induction window will keep flashing, wait until the red light on the induction window on the faucet body does not flash, push it into the battery box and lock it. Installed.
5. Open the water source of the water inlet where the product will be installed.
6. After 3 minutes, please stop back and forth in front of the sensor window with your hand, the water will flow out automatically, and adjust the water flow on the water valve button. It is recommended to use a water pressure of 1 kg/cm2~2 kg/cm2 (generally, the height of a three-story building is 3 kg/cm2).
2. What are the maintenance methods for the induction faucet?
1. When installing the faucet, all kinds of impurities in the pipeline should be completely removed. Spool damage, jamming, clogging and leakage are avoided. At the same time, the surface should be cleaned so that it does not leave residues of building materials.
2. When the faucet is in use, there is no need to use too much force when switching it on and off, just gently twist or toggle it. In particular, do not support or use the handle as an armrest. Products with a screen cover for the water outlet should be disassembled and rinsed after a period of use to remove impurities.
3. The faucets that have been used for a short time sometimes have incomplete closure, leakage, loose handles, loose connections and water leakage, etc. Generally, consumers can solve them by themselves.
4. When cleaning, be careful not to wipe the surface of the faucet with hard objects such as steel wool, because the steel wool is very hard and it is easy to scratch the surface of the faucet. It is best to use a neutral detergent for cleaning. After the faucet is cleaned, the remaining moisture on the surface should be wiped dry with a dry, lint-free towel to avoid scale formation.
