After a hot bath, the whole bathroom becomes a steam room. When you walk out of the bathroom comfortably, the smoke is lingering, but the next person who goes to the toilet will feel stuffy and wet, and the wet floor is a headache for housewives. It’s the cause of bathroom slips and a breeding ground for mold growth! Are you also very envious of the bathroom space in the hotel where the dry and wet are distinct? If you want the bathroom to be clean and the windows bright, as long as you master the law of separation of dry and wet, you can do it easily.
Semi open shower
The transparent partition can block water but not light. The doorless design does not take up much space. The semi-open partition breaks through the problem of dry and wet partitions in small bathrooms.
Transparent glass partition
The walls of the shower area are covered with red tiles, and the walls of the bathtub area are painted with blue waterproof wall paint. A partition divides the dry and wet areas, and also interprets two styles.
Design Highlights
·Semi-open glass partition. The end of the bathroom space is separated from the shower area by glass, and the upper and lower parts are fixed with hardware. The metal strip and glass glue will perfectly close the joint. The mosaic on the ground is not only anti-slip, but also makes the water conduction angle of the ground more accurate.
· The shower area is tiled. Although there are special bathroom paints on the market, tiles are more reliable to withstand the test of water flow and steam. The advantage of the wet and dry zone is that you can paint the dry area arbitrarily.
frosted glass partition
If you don’t want the shower area to be seen through at a glance, you might as well use frosted glass as a partition, and the good light transmission also avoids the trouble of insufficient light.
Design Highlights
·The glass frosted side is installed outwards. It is the characteristic of frosted glass that it will become transparent when wetted with water. In order to ensure privacy, the frosted surface should be installed outwards. In hard water areas with large scale, the rough surface of the glass should face outwards. Otherwise, scale will accumulate over time and cleaning will become troublesome. .
·Semi-open shower area with smooth drainage. In a semi-open shower area, if the drainage is not smooth enough, other areas will be affected. In addition to having a sufficient slope on the ground, you can also install a strip floor drain on the wall to speed up the drainage.
Solid wall shower room
Compared with transparent glass partitions, solid partitions bring more privacy. The pipes and air wells that cannot be avoided in the apartment can also be hidden by means of partition walls.
