The inner core of the floor drain is essential in family life, and the bathroom without the floor drain will be very inconvenient. So, the floor drain inner core can not be taken out how to do? This requires a certain way, it may be a long time did not manage the floor drain, causing blockage, the following is all hair caused, how to operate can see the detailed explanation provided by the site ~
1, the floor drain inner core can not be taken out how to do
First, use a screwdriver to pry up the joint between the floor drain and the tile, or rotate the floor drain cover to the gap of the track, lift it and twist it open, and then use a lubricant or loosening agent to loosen the parts around the floor drain core until it is loosened. If none of the above methods work, use a cutting machine to remove the floor drain and replace it again. In addition, long-term use will block the floor drain, so it needs frequent inspection and maintenance, and some daily maintenance and cleaning are required.
2, what is the impact of taking out the inner core of the floor drain
The floor drain should always be taken out to clean up, otherwise it is easy to cause blockage, so there is no harm in taking out the inner core of the floor drain, on the contrary, it is more conducive to drainage.
In fact, most floor drains can be removed from the plastic cores by hand. You only need to remove the drain cover and filter in order to remove the drain core. Of course, if you can’t remove it by hand, you can rely on screwdrivers and pliers to remove the plastic core from the floor drain, but at the same time clean up the cement, sand and other debris around it.
3. Are floor drains the same size
Floor drains are not all the same size.
The size of the bathroom floor drain is basically a 10 * 10cm panel; The drain pipe is basically 50; If the drain pipe is modified, it must use 40 drain pipes, which requires the purchase of ultra-thin floor drains. Both the washing machine floor drain size, kitchen and bathroom floor drain size, are close to 10 * 10 or 11 * 11cm specifications; There’s not much difference.
The height of the drain depends on the piping arrangement of the drainage system. Therefore, the height of the floor drain used with it is best within 200mm and 120mm, and must be discharged from the side.
There are two commonly used hidden installation methods: the partial sinking tube on the bathroom floor and the mat tube used in the bathroom. In order to meet the requirements of toilet headroom and ergonomics, the former has a sinking space of 300mm, and the latter has a seat height of 170mm.
