The emergence of fully automatic washing machine allows people to save the physical effort consumed in washing clothes, but also save time to deal with other work, so once listed immediately occupied the mainstream position in the washing machine market. Although its price is more expensive than semi-automatic washing machines, but still can not reduce its popularity, so when bought it back home, how to use the automatic washing machine? We start with the installation step by step to explain it.
Fully automatic washing machine installation steps
1. Remove the transport bolts. The back of the washing machine is installed with four transport bolts to prevent the inside of the washing machine from being damaged during transport. These bolts should be removed before using the washing machine.
2. Connect the inlet pipe. The connection of the inlet pipe includes two, one is the connection between the inlet pipe and the water inlet valve of the washing machine, and the other is the connection between the inlet pipe and the faucet.
(1) water inlet pipe and washing machine water inlet valve connection: the end of the water inlet pipe connector set in the water inlet valve inlet, and then tighten the screw can be.
(2) Intake pipe and faucet connection.
a. First of all, hold the connection seat in one hand, and press the buckle ring with one hand and pull it down to separate the connection seat from the inlet pipe. Loosen the four fastening screws on the connection head, screw down the connection head, so that there is a gap of three threads between the upper and lower connection head.
b. Evenly adjust the 4 screws on the connector head so that the 2 screws on the side against the wall are in full contact with the outside of the faucet, and then the upper connector head against the faucet so that its internal seal is in full contact with the faucet.
c. Rotate the 2 screws on the opposite side of the wall to make contact with the faucet, and then tighten it with the spinning tool, and rotate the lower connector until the upper and lower connectors are tightened in position.
d. Then press the grommet of the gold city tube downward, insert the inlet pipe upward into the lower connection seat, then release the grommet, and finally check whether the device is leaking, and if it is leaking, then you have to reinstall it before you can.
How to use the automatic washing machine
Automatic washing machine in the correct installation of automatic washing machine after the specific operation of the use of the following methods.
1, purchase and installation. Purchase automatic washing machine can be based on their own preferences and economic conditions to decide, in fact, individuals believe that automatic washing machines are more or less the same, only in terms of laundry capacity differences, after the purchase, after-sales service will give you the installation and commissioning.
2, power on. Put the clothes into the washing machine, then connect the inlet pipe and power supply, while turning on the tap.
3, pour in laundry detergent or laundry detergent. The amount of laundry detergent should be decided according to the amount of clothes and the degree of cleanliness. The washing powder can be poured directly into the washing machine, but in order to be even, it is best to pour it into the washing powder box that comes with the machine.
4, choose the way to wash. Press the power switch, according to the amount of laundry to choose a good water level, and according to the degree of dirty laundry and material and other specific circumstances to choose a good program. Different models of washing machines on the washing method is not the same, if it is a wool sweater or something on the choice of gentle washing, general clothes can choose the standard washing. There are models above the tube self-cleaning or something, is used to clean the drum.
5, press the “start / pause” button, the washing machine began to work. After the selected program is finished, the buzzer will sound a beeping sound.
6, after work, turn off the power switch and unplug the power from the socket, turn off the tap, and then open the lid, take out the laundry, clean the thread filter bag, and dry the washing machine.
Well, after reading the above introduction, I believe that we should have a clear understanding of how to use the automatic washing machine, in general, the use of automatic washing machine is still very simple, the general instructions will also have the corresponding explanation, read carefully.
