Working principle of air conditioner water heater
The air-conditioning water heater is safe, because it is not directly heated by electric heating elements, so compared with electric water heaters, the potential safety hazard of electric leakage is eliminated. Compared with gas water heaters, there are no safety hazards such as gas leakage or carbon monoxide poisoning, so it has better safety performance. Comfortable, the air-conditioning water heater is a heat storage type, and the heating function is automatically activated according to the temperature in the water tank to ensure sufficient hot water supply for 24 hours, so there will be no problem like a gas water heater that cannot satisfy multiple faucets at the same time. There will be no problem that the capacity of the electric water heater is small, and many people need to wait for bathing. Hot water is available immediately after opening, with a large amount of water output and a stable temperature of the output water, meeting all your expectations for hot water.
The air conditioner water heater consists of 2 main parts, the air-conditioning part and the hot water heating part. In fact, these two departments are closely related, inseparable, and must work at the same time. That is, while heating hot water, it cools the kitchen. In other words, while cooling the kitchen, it is also heating hot water. The internal structure is mainly composed of four core components: compressor, condenser, expansion valve, and evaporator.
Working process, the compressor compresses the returning low-pressure refrigerant and turns it into a high-temperature and high-pressure gas, and the high-temperature and high-pressure refrigerant gas flows through the copper tubes wound outside the water tank, and the heat is conducted into the water tank through the copper tubes. Under the continuous action of pressure, it becomes liquid, and then enters the evaporator after passing through the expansion valve. Because the pressure of the evaporator suddenly drops, the liquid refrigerant evaporates quickly and becomes gaseous here, and absorbs a large amount of heat. Under the action of the fan, a large amount of air flows through the outside of the evaporator, the energy in the air is absorbed by the evaporator, the temperature of the air drops rapidly, and the cold air is discharged into the kitchen. Then the refrigerant that has absorbed a certain amount of energy flows back to the compressor and enters the next cycle.
Installation and maintenance of air conditioner and water heater
The kitchen cooling effect of air-conditioning water heaters is the biggest advantage. Ordinary water heaters (such as electric heating, gas water heaters, solar water heaters, etc.) basically cannot have the cooling effect. If you want to increase the cooling function in the kitchen, you need to buy a kitchen air conditioner. Because the kitchen has oil fume, it is a special environment, so the kitchen air conditioner is different from the ordinary air conditioner, and the price is much more expensive. Gas water heaters heat hot water by burning combustible gas, and at the same time emit a large amount of harmful exhaust gases such as carbon dioxide and sulfur dioxide. The air-conditioning water heater only transfers the heat in the surrounding air to the water, completely achieves zero emissions, and has almost no impact on the environment. It is a truly environmentally friendly water heater.
The air conditioner water heater is usually installed on the balcony of the kitchen, and the air outlet is adjacent to the kitchen through the air duct, so that the cool air blown out can directly enter the kitchen to achieve the cooling effect. During installation, you only need to connect the cold and hot water outlet to the reserved hot and cold water in the house, and then use it. The installation is very simple. Air-conditioning water heaters mostly use microcomputer intelligent controllers, which have various intelligent control functions such as time setting, timing switch function, water temperature setting, ventilation setting, and overheating protection. However, most of the functions have been set by the manufacturer at the factory, and the default values can be used directly. Basically, you only need to set the temperature you need (usually set at 45-50 degrees) and you can use it. Generally, the service life is more than 10 years, does not contain consumable heating elements, generally does not need to replace elements, and does not require deliberate maintenance under normal use. Pay attention to relevant protection during installation, and prevent heavy rain and strong sunlight.
