Scientifically certified people are the most relaxed when taking a bath, and it is precisely because of this that the products we use when taking a bath in our lives have also undergone a lot of progress and styles, and how to help us in the bathing process with so many As for the selected products among the products you enjoy, the editor recommends you the overall shower room, and has prepared a tutorial on the installation steps of the overall shower room for you. Please see the introduction of the overall shower room installation below.
Introduction to the overall shower room
The integral shower room is a non-steam generating device, which is a sanitary unit composed of a spray device, a shower room body, a shower screen, a top cover, a bottom basin or a bathtub. The basic structure of the shower room is the chassis and the fence. The chassis is mostly made of diamond, acrylic, fiberglass, etc. Sizes vary. 900×900mm and 1000×1000mm are more suitable for home use. The frame of the fence is mostly made of aluminum alloy, and the outer layer is sprayed with plastic, which is not rotted or rusted. The fence is equipped with PS plastic board, FRP board or cloth tempered glass door and chrome-plated handle for easy access. The luxury shower room is controlled by computer, and has functions such as surfing, back massage, steam, waterfall faucet, bath mirror, etc., as well as lighting and music, which are expensive.
Overall shower room installation steps
The first step should be the installation of the bottom basin. For the installation of the bottom basin, it is true that the waterlessness of the bottom basin is very important. If moisture is retained, it will have a great impact on the installation. At the same time, when the bottom basin is connected to the pipeline, pay attention to firmness to prevent water from leaking out. For the hose, the distance of the regulator can be adjusted as needed.
Test it with water to ensure the accuracy of the installation and to ensure that the water can flow away normally. Then the operation of punching holes is used to fix the aluminum material against the wall.
Then put the fixed colloidal particles and other components into it, then fix the aluminum strip on the wall, and then fix the glass material to be used at the place where the bottom basin is drilled.
Drill a hole on the side of the fixed glass, then install the fixing seat, and then connect the top pipe. Then there is the installation of the shelf. We know that if there is no shelf in the shower room, it will not be easy to place the changed clothes when you go in to take a bath. Installing a movable door can save space, and it will be more convenient to push and pull. The next step is to do a good job of waterproofing and fixing between the glass. Use glass glue to seal the place that needs to be sealed and fixed.
Then check the installed shower room to ensure that the installed shower room is waterproof, drains smoothly, and can be used normally. If you find that there are certain deficiencies in water intake and drainage, pay attention to renovations, and at the same time tighten the screws and the like. Then remember to wipe the shower room clean with a rag.
If the residents like it, they can also install some pictures or other beautiful styles on the glass in the shower room to make their shower room look more beautiful and comfortable, and more suitable for their own preferences.
