HOMENews

Interior flooring decoration steps

Interior flooring decoration steps

2023-06-27 03:06:05

In understanding the steps of indoor flooring decoration, we can also first understand the origin of wood flooring. In the past few years, most of the decoration is ceramic tile, but in recent years with the rise of the concept of external decoration, the floor of this kind of ground decoration is also more and more welcomed by the owners, in 199X, the floor is mainly imported, imported wood flooring must be more expensive, after all, the cost of its own is placed there. So there are not many owners who use the floor, but in recent years, as domestic manufacturers began to mass-produce the floor, the price of the floor is getting lower and lower, and more and more owners choose the floor.

① Basic treatment: The uneven base should be levelled with cement mortar and then paved with wood flooring. The base layer should reach the surface without sand, no skin, no ash, no empty drum, no oil stains, and no rough feeling. If it does not meet the requirements, the ground should be treated first. General rough room floor only need to use a broom to clean the floor dust and debris.

2 Determine the direction: Determine the direction of the floor laying, generally facing the south room, mainly in the north-south direction, that is, the floor is vertically exposed to the direction of the sun, that is, the floor is the most common north-south laying.

(3) Installation of wooden keel: The embedded parts should be made on the ground first to fix the wooden keel, the embedded parts are bolts and lead wire, the spacing of the embedded parts is 800 mm, and the holes are drilled from the ground.

④ anti-moisture mat: The use of 1.5 thick anti-moisture mat can isolate the moisture of the ground and avoid deformation due to the moisture of the floor in daily use.

⑤ Cushion insulation layer: the spacing of wood joists is generally 400 mm, and the middle insulation layer is to reduce the empty drum sound when walking and improve the thermal insulation effect. The base layer and the back of the insulation layer are coated with glue at the same time, and the rubber surface can be laid when it is not sticky.

⑥ Floor pre-paving: Through pre-paving can reduce the impact of color difference on the paving effect, to avoid the occurrence of large flowers, excessive contrast, for some appearance has an impact, can be laid to the bottom of the bed, the bottom of the cabinet and other positions.

7 After leveling the floor: First, the paving board, on the already adjusted wooden keel, with the floor studded with wood lining nails for more than 2.5 times the thickness of the lining board, leaving a 2mm gap between the adjacent lining board. Then, the piece against the wall should leave the wall 10mm gap, and then line it up one by one, and nail it diagonally from the concave corner of the floor with the floor nail, the nail cap should be smashed flat, the toning plate should be nailed firmly and tightly, and the back of the wood floor should be brushed with high-quality wood glue.

⑧ Installation of kickers: After the floor is laid, a gap of 8-12mm should be reserved between the floor and the surrounding area such as the wall and the doorstone to reserve space for the expansion of the floor, and the gap should be covered by the installation of the kicker.

The floor is usually installed during decoration. Should the decoration company shop or be provided by the floor manufacturer? The answer is that flooring manufacturers are more professional. Decoration workers do not necessarily understand the paving of the floor, nor are they professionals, and it is easy to make mistakes when paving. In addition, if you want to decorate the company to pave the floor, it is bound to generate another installation fee. Most of the floor manufacturers on the market provide free installation services (some online shopping products are not equipped with installation personnel, to choose carefully), by professional construction, quality is more guaranteed. Therefore, at the time of decoration, it is necessary to communicate with the decoration company to have a good time and let the floor vendor shop.

The most worried problem of installing wood flooring is that the ground is uneven, and the other is that the ground has sand. Uneven ground will lead to uneven stress on the floor, paving is not tight, resulting in later floor cracks, floor movement, and even warping and other problems, easy to conceal dirt, affecting normal use. The ground is not clean, resulting in sediment penetration into the cracks in the floor, easy to cause the floor to move, creaking and other problems, seriously affecting the use of feelings. When installing a regular floor manufacturer, the floor will measure the flatness of the floor, solve the uneven problem (for example, the wooden floor will use a keel), and clean the floor. In order to ensure a better paving effect, the owner had better clean up the site in advance.