HOMENews

Introduction to shower maintenance skills

Introduction to shower maintenance skills

2022-11-07 02:11:01

 

Shower is one of the necessary products in modern bathroom, hand-held shower is also one of the most commonly used products in our daily life. Usually, the shower we use will produce a certain amount of scale and impurities due to the long time of water flow. So we need to learn the maintenance of the shower, and master the maintenance skills of the shower can make the service life of the shower longer. Here is a small series together to understand how to maintain the shower and the right way to maintain the shower.

1. Scale removal: every half a year or less, remove the shower and place it in a small basin. Water the surface and interior of the shower with edible white vinegar and soak it for 4-6 hours, and then gently wipe the outlet on the surface of the shower with a cotton rag: After reloading the joint, water is passed for a moment, until the white vinegar and scale are discharged with the water flow, in order to eliminate or reduce the influence of scale on the shower, and with a certain bactericidal effect.

2, faucet electroplating surface maintenance: often use a soft cloth stick a little flour to wipe the electroplating surface of the shower, and then rinse with water to make the surface of the shower bright as new.

Note: ①, please pay attention to your own safety and product safety when disassembling and assembling the shower; (2) The mesh gasket should not be too large or too fine. Too large may not have the effect of filtration, and too fine may affect the flow rate. The specification of the mesh should be 40-60 mesh.

3, do not use strong acid when removing scale, so as not to cause corrosion on the surface of the shower.

4. Do not disassemble the shower for maintenance. Improper disassembly will cause damage to the appearance and internal structure of the product.

5. The ambient temperature of the shower should not exceed 70℃. High temperature and ultraviolet light will greatly accelerate the aging of the shower, shorten the service life of the shower, so the installation of the shower as far as possible away from the bath bar and other electrical heat sources. The shower can not be installed directly under the shower bar, and the distance should be more than 60CM.