First, is it necessary to install a small bathroom towel rack
Whether it is necessary to install a small bathroom towel rack depends on whether you need to stabilize yourself.
1. Pass the short screw through the small hole of the metal piece in the installation foot tube.
2. Use short screws to fix the installation pin to the metal washer on the riser.
3. Tighten the short screws with a screwdriver. When installing the foot pipe, ensure that the small holes on the foot pipe face the floor.
4. Repeat steps 1-3 to fix the remaining three mounting legs to the riser.
5. Place the heated towel rack face down and carefully flat on a soft object. Use a tape measure to measure the position of the four screw holes on the back of the riser. Use ABAC, CD, BD to indicate four screw holes. Connecting distance.
6. According to the 4 distances obtained in Step 5, mark A, B, C, D on the wall with a pencil; It is recommended that the minimum height of the installation be 60 cm from the ground. Also note that the socket should be positioned farthest from the power plug. More than 140 centimeters.
7. Drill four mounting holes on walls A, B, C and D4 with an electric drill.
8, hammer 4 with plastic expansion screw sleeve 4 embedded in the wall mounting hole, the screw should be completely embedded in the wall sleeve.
9. The bushing wall with long screw 4,4 is screwed into the wall of the plastic expansion screw fixing sleeve.
10, Put the 4 wall bushings into the 4 electric towel racks and install them in the foot tube.
11. Use a hexagonal right Angle wrench to screw the countersunk screw into the small hole for installing the foot tube, and then tighten it to fix the wall bushing and install the foot tube.
12. Fix the remaining three legs and wall mounting bushing in the same manner; Finally, install with a clean, soft cloth towel rack.
Second, how to choose the size of the towel rack
1, the towel rack is composed of two supports supporting one or more cross bars, some folding, generally installed in the bathroom wall, for placing clothes, hanging towels bath towels. Divided from the material, it is generally divided into: all copper towel rack, stainless steel towel rack, aluminum alloy towel rack, zinc alloy towel rack. According to the structure can be divided into: single layer and double layer. According to the shape can be divided into: towel rack, towel rod, towel ring and so on.
2, the towel rack size is generally 50CM, 60CM, 70CM, 80CM and so on. However, because the size of the bathroom is different, friends can choose the corresponding size of the towel rack according to the size of their own bathroom when purchasing.
It can be seen that if the bathroom space is large, the installation of the towel rack will become more spontaneous, but the small bathroom space is not completely impossible to install, as long as you use the space appropriately and skillfully according to the installation steps, you can achieve the needs.
