Before the installation of the Yuba, it is necessary to connect the wiring and leave a good exhaust hole, so that the exhaust fan and the Yuba lamp can be separated, and the Yuba can be turned on to ventilate the air at the same time. So, how high is the bathroom ceiling generally reserved for Yuba? Let’s take a look at the introduction brought by life knowledge!
full text catalog
1. Is it okay for Yuba not to have vent holes?
2. The ceiling of the bathroom is generally reserved for the height of the Yuba
3. How to repair the broken wind heating Yuba lamp
Is it okay for Yuba not to have vent holes?
The Yuba does not have vent holes. However, if the Yuba does not have vent holes, you need to pay more attention to hygiene issues, because the main function of the Yuba vent holes is to remove the odor and moisture in the bathroom. At the same time, the exhaust fan of the Yuba is separated from the switch of the Yuba lamp , You can choose not to turn on the exhaust fan when bathing, and at the same time, pay attention to the higher the power of the Yuba, the higher the temperature. Therefore, when choosing a Yuba, you need to give priority to the Yuba of a big brand, which is more reliable. Secondly, you can start from the function of the Yuba, and choose different functions according to your own needs. At the same time, you must also pay attention to the size and size of the Yuba Whether the dimensions of the bathroom match.
The ceiling of the bathroom is generally reserved for the height of the Yuba
Generally, the height of the Yuba is 200mm. It is necessary to reserve a distance of 10mm for heat dissipation, because the Yuba needs to dissipate heat and cannot be installed directly on the ceiling. To choose Yuba, bathroom ceiling, not only Yuba, but also the distance between pipelines passing Yuba, lamps, etc. or the distance between tile paving layer, waterproof layer, waterproof protective layer, ground pipeline, and tile surface. If the ceiling is relatively high, the room will appear empty, if the ceiling is relatively short, it will appear too oppressive, so the bathroom ceiling must be implemented according to the specifications.
How to repair the broken lamp of air heater and Yuba
First disconnect all the power supply, then use the removal tool to remove the fan heater from the ceiling of the bathroom, and remove all the decorative panels. There is a problem with the fan heater in the bathroom. In most cases, the motor and fan blades are faulty. Therefore, the motor and fan blades should be checked. The inspection method is to connect the removed fan heater to the power supply, check whether there is any abnormality, and check the exhaust at the same time. If the blades of the exhaust fan are not running, it means that there is a problem with the motor, that is to say, a new motor needs to be replaced. If there is no abnormality after powering on, it means that there is a problem with the blades. Just replace the blades.
