The shower can make us very comfortable when taking a shower. When the water sprayed from the shower is on the body, because of the water pressure, it is very comfortable to hit the body, like a massage. However, in the case of a rain shower, the water temperature is easy to fluctuate. At this time, we can choose a constant temperature shower. If you install a constant temperature shower, you must pay attention to it. The left side is hot water and the right side is cold water. Do not install it backwards, otherwise it will be a bit troublesome.
1. Is there any conversion fittings for the hot and cold water of the constant temperature shower?
If there is a conversion pipe fitting, you can choose to install a reverse hot water thermostat valve or a cold-heat conversion pipe. However, this is applicable to the situation where the waterway is installed in reverse. After the conversion pipe is installed, the thermostatic shower will be in the state of hot water on the left and cold on the right. up. If the cold and hot water pipes in the bathroom are installed upside down, then you can only use the shower in reverse when using it. The constant temperature shower generally has hot water on the left and cold water on the right. If cold water comes out from the left and hot water comes out from the right, then it is installed backwards.
2. What happens if the thermostatic shower is installed backwards?
Since the spools of the cold water valve and the hot water valve are not exactly the same, it is strictly speaking affected. In terms of safety, it is easy to burn if it is opened incorrectly. Therefore, if the house has not yet been paved with bricks, it is recommended to remove and swap the two hoses for hot and cold water. The operation is very easy and you can do it yourself. If you find it troublesome, you can leave it alone. When connecting the water heater, connect the cold water to the hot water pipe, and the hot water to the cold water pipe, so that the water from the shower is hot on the left and cold on the right. But the premise is that the hot water and cold water pipes in your home are both hot water pipes, and now many home decoration PPR pipes are hot water pipes.
3. What should I do if the water from the shower is hot and cold?
In this case, we can install a bath thermostat valve. The thermostatic bath valve is equipped with a highly sensitive memory alloy spiral temperature sensor at the outlet of the constant temperature water. The sensor can sense its own expansion or contraction, and directly control the inlet flow of cold and hot water, so that the outlet temperature always reaches the set temperature (25 – 55°C). Or you can directly buy the thermostatic shower with its own thermostatic regulating valve, which can automatically balance the water pressure of cold and hot water to maintain a constant temperature. Because ordinary showers adjust the water temperature by mixing hot and cold water, once the water pressure of the cold and hot water changes, the water temperature will change frequently.
