When we buy bathtubs, we not only need to be beautiful and convenient, but also comfortable, so more and more people are choosing massage bathtubs. However, how to install the jacuzzi and what are the classifications? Today, I will introduce the installation steps of the jacuzzi and the classification of the jacuzzi.
Jacuzzi installation steps
1. Do a good job of inspection
Put the bathtub in a relatively spacious place and check whether the surface is intact. All kinds of spare parts should be readily available, and each nozzle hole should be bright and fastened. The quality of the motor is closely related to the use effect of the jacuzzi, so special attention should be paid to its installation, piping and quality.
2. Pay attention to waterproof
Before going to the designated location, the parts that are prone to water leakage should be waterproofed with silica gel. Connect the parts that can be connected first, so as not to be inconvenient to install after being placed in the designated position. The waterproof between parts must be done well, especially the connection between the water outlet and the motor water pipe is very critical.
3. Fixed position
Put the jacuzzi in the designated position, and in the bathroom with small space, avoid excessive tilting or bumping of the bathtub. Put the drain in the pipe and make sure the water is free. After the cylinder is put in place, the anchor screws should be adjusted continuously to make all the screws land on the ground safely to ensure the overall level.
4. Secure connection
After the plug is connected, waterproofing should be done around the power board to avoid leakage accidents. If there is no abnormality after inspection, the hot and cold water pipes can be connected in place. Before connecting the water pipe, conduct a power-on test of the motor to check whether the sound meets the requirements. If not, rework immediately.
5. Detection function
Put the jacuzzi in place completely after the connection, and adjust the level again. Turn on the water and electricity, check all the functions, and solve the problems in time. The surfing effect of the bathtub should be inspected mainly. The main contents of the inspection are the flushing force, the sound of the motor, and the presence or absence of foreign objects.
6. Protect the finished product
Drain the water in the cylinder, and wipe off the remaining water droplets at the bottom of the cylinder and the water droplets at the nozzle holes to prevent the nozzle holes from rusting due to long-term use of the bathtub. When the bathtub is installed, other decorations in some families have not been completed. At this time, the installer should use a film to protect the bathtub to prevent damage.
Jacuzzi classification
The massage methods of the jacuzzi can be divided into: whirlpool massage, bubble massage, and mixed massage.
1. Jacuzzi whirlpool massage: This is the most traditional hydromassage method. Powerful nozzles shoot water and air from the side of the bathtub, producing a double effect. It has significant functions on blood circulation, lymphatic tissue and waste removal. , The whirlpool generated by the whirlpool massage can comfortably massage the entire body.
High water flow silent adjustable nozzle, 3/8″ nozzle, at 18psi (Pascal) pressure, the air switch is fully open, the nozzle water output is 14gpm (gallons per minute). The nozzle can produce about 10,000 small Air bubbles, smaller air bubbles are not easy to rise to the surface of the water quickly and burst, so the water flow from the nozzle is powerful but very gentle. The nozzle can massage the size of the water, and the nozzle can be opened from the front to clean the inside of the nozzle.
2. Double spiral massage nozzles, unique swirling bubbles and continuous vortex action create air and water flow in the same direction of rotation. Delivers deep massage power to effectively relax tense muscles and relieve stress.
Jacuzzi bubble massage: the system uses the bubble pump to pass through the bubble nozzle at the bottom of the bathtub to generate a large number of bubbles to wrap the whole body and gently touch the body, which can make the spine and neck feel comfortable, so that muscles and body and mind can be relaxed.
Many jacuzzi bathtubs on the market also have nozzles at the bottom, but they do not actually have the function of bubble massage, because:
(1) If there is no bubble pump installed, there will be no bubble massage function.
(2) Its bottom nozzle is connected with the water pump, and what sprays out is a water flow, which cannot achieve the effect of relaxing the body. Moreover, because the pipeline connecting the bottom nozzle and the water pump is lower than the water suction port, the accumulated water in these pipelines cannot be discharged at all.
3. Jacuzzi mixed massage: Combine whirlpool massage and air massage into one, the whirlpool nozzle next to it can remove waste in the lymph, and the air nozzle can produce ozone and fountain effects.
