Before carrying out the decoration, demolition and modification project, the tripartite clarification work must be done well. This step needs to be completed by the joint participation of the customer, designer, project supervisor, construction director and main technical workers. Don’t underestimate this step. If it is not done well If it is not, it will directly affect the decoration, demolition and modification project, so let’s take a closer look at it together.
Introduction to the matters needing attention in the demolition project:
1. Apply for a construction permit
Before carrying out the demolition and modification project, you must first apply for a construction permit. Generally, you need to pay a certain amount of decoration guarantee money to the property, and these guarantee money will be returned to the owner after the decoration is completed.
2. Determine the location of waterway appliances
The positioning of water and electricity furniture must be done well, and the location of water, electricity and household appliances must be determined in advance according to the design plan and decoration requirements. Water and electricity positioning is related to the use of electrical appliances and sockets, as well as the later installation of sanitary ware and gas equipment, so it must be prepared in advance. When positioning the furniture, reserve space for future installation work. It is necessary to understand the use of household appliances and power consumption on the spot, and choose a reasonable water and electricity implementation plan.
3. Arrange materials to enter the site for acceptance
When the materials enter the site, attention should be paid to the acceptance work, and the specific acceptance time must be agreed with the decoration company and the supervisor in advance to avoid quality problems of the materials entering the site.
4. The integrity of the continued use items must be ensured
Attention should be paid to retaining the integrity of the items for continued use. The owner should clearly explain to the decoration company on site the items that need to be kept for continued use, and both parties should confirm whether there are any problems on site. If there is an increase or decrease in items, both parties need to explain on site Clear and sign for confirmation.
Three steps that cannot be ignored in the demolition project:
Step 1: Finished Product Protection
Cross-contamination and bump damage will inevitably occur during the finished product protection construction process. Therefore, it is particularly important to do a good job in the protection of finished products before construction. Objects protected by finished products can be roughly divided into movable objects and immovable objects:
Movable objects: Before the official construction, the original fixed equipment can be dismantled and transferred to other places for safekeeping. Such as air conditioners, cabinets, range hoods, etc.
For objects that cannot be moved, protection measures can be taken in situ, such as floors, tiles, walls, doors, etc. The floors can be covered with moisture-proof mats and cardboard, and a layer of 3~5mm wooden boards can be added for protection on more expensive floors. The tiles can be laid with cardboard and color strips, and the seams are fixed with transparent adhesive tape. Newspapers can be used for wall protection. Anti-theft doors and finished doors can use bubble film plus transparent tape, generally need to be wrapped on both sides to prevent pollution.
Step 2: Demolition Work
The main work of main body demolition is demolition, including shoveling wall skin, demolishing walls, removing tiles, dismantling suspended ceilings, dismantling heating, dismantling doors and windows, removing old equipment, etc. Through dismantling and modification, the interior pattern can be reorganized to make full use of the space.
Step Three: Clean Up Construction Waste
[Precautions for demolition and modification projects, the three parties should make a good disclosure before the demolition and modification] After the demolition and modification is completed, the construction waste must be cleaned up in time, which is generally handled by decoration companies.
Before carrying out the decoration, demolition and modification project, the tripartite clarification work must be done well. This step needs to be completed by the joint participation of the customer, designer, project supervisor, construction director and main technical workers. Don’t underestimate this step. If it is not done well If it is not, it will directly affect the decoration, demolition and modification project, so let’s take a closer look at it together.
Introduction to the matters needing attention in the demolition project:
1. Apply for a construction permit
Before carrying out the demolition and modification project, you must first apply for a construction permit. Generally, you need to pay a certain amount of decoration guarantee money to the property, and these guarantee money will be returned to the owner after the decoration is completed.
2. Determine the location of waterway appliances
The positioning of water and electricity furniture must be done well, and the location of water, electricity and household appliances must be determined in advance according to the design plan and decoration requirements. Water and electricity positioning is related to the use of electrical appliances and sockets, as well as the later installation of sanitary ware and gas equipment, so it must be prepared in advance. When positioning the furniture, reserve space for future installation work. It is necessary to understand the use of household appliances and power consumption on the spot, and choose a reasonable water and electricity implementation plan.
3. Arrange materials to enter the site for acceptance
When the materials enter the site, attention should be paid to the acceptance work, and the specific acceptance time must be agreed with the decoration company and the supervisor in advance to avoid quality problems of the materials entering the site.
4. The integrity of the continued use items must be ensured
Attention should be paid to retaining the integrity of the items for continued use. The owner should clearly explain to the decoration company on site the items that need to be kept for continued use, and both parties should confirm whether there are any problems on site. If there is an increase or decrease in items, both parties need to explain on site Clear and sign for confirmation.
Three steps that cannot be ignored in the demolition project:
Step 1: Finished Product Protection
Cross-contamination and bump damage will inevitably occur during the finished product protection construction process. Therefore, it is particularly important to do a good job in the protection of finished products before construction. Objects protected by finished products can be roughly divided into movable objects and immovable objects:
Movable objects: Before the official construction, the original fixed equipment can be dismantled and transferred to other places for safekeeping. Such as air conditioners, cabinets, range hoods, etc.
For objects that cannot be moved, protection measures can be taken in situ, such as floors, tiles, walls, doors, etc. The floors can be covered with moisture-proof mats and cardboard, and a layer of 3~5mm wooden boards can be added for protection on more expensive floors. The tiles can be laid with cardboard and color strips, and the seams are fixed with transparent adhesive tape. Newspapers can be used for wall protection. Anti-theft doors and finished doors can use bubble film plus transparent tape, generally need to be wrapped on both sides to prevent pollution.
Step 2: Demolition Work
The main work of main body demolition is demolition, including shoveling wall skin, demolishing walls, removing tiles, dismantling suspended ceilings, dismantling heating, dismantling doors and windows, removing old equipment, etc. Through dismantling and modification, the interior pattern can be reorganized to make full use of the space.
Step Three: Clean Up Construction Waste
After the demolition is completed, the construction waste must be cleaned up in time, which is usually handled by decoration companies.
