Air conditioning can adjust the indoor temperature well, so it can provide us with a more comfortable environment. The use of air conditioning is relatively wide, air conditioning is widely used in various fields at present. Sometimes, when there is a series of problems with air conditioning, we need to disassemble the air conditioning, so as to solve the maintenance. Do not know how to disassemble the United States air conditioning, the following specific for you to introduce the disassembly of the United States air conditioning related methods and how to clean the United States air conditioning.
First, how to clean Midea air conditioning
1. Disconnect the power supply of the air conditioner;
2, the air conditioning host (also outdoor unit) shell unloaded, with vinegar and water (professionals are cleaning with polyester dust, a can is about 25 yuan) after dilution wet radiator, soak a few minutes after cleaning its leaves with a toothbrush, will be absorbed in the radiator dust clean can be, pay attention not to get the water to the circuit board, after cleaning cover back to the outer cover of the host;
3, cleaning the auxiliary machine (indoor machine), the indoor machine cover open, it is fixed on the cover, open below, do not use brute force, below you will find two special open the cover card hand place, on both sides, a hand buckle one of them, to the position of 45 degrees Angle slightly hard break on the line. Use the same way to clean the evaporator, after cleaning, cover back to the secondary housing, pay attention to do not let the water wet the circuit part.
4, in addition, you can also find the household appliances maintenance department to clean, the cost is not very high, the cost of cleaning a machine should be between 30 and 50 yuan.
Two, how to disassemble and assemble the air conditioner
1. Power on and refrigerate.
2. Remove the two nuts on the side of the connecting pipe of the external machine, and you can see the spool (5MM hex wrench).
3. Tighten the small tube spool clockwise with the hex wrench for 30-40 seconds and then tighten the large tube spool clockwise.
4. Turn off the power as soon as possible.
5. Disassemble the pipe and circuit of the external machine with + screwdriver and 300 adjustable wrench.
6. Remove the foot screws of the external machine (lifting the external machine) and the mounting bracket with 14-17 open spanner.
7. Correct the pipeline according to the direction of the wall hole.
8. (Hang up) Find the two triangle marks on the lower edge of the inner machine against the wall. From near the mark, reach into the inner Allen wrench and pull it out, and then pull the inner machine up to lower the inner machine.
So when you disassemble the air conditioning of the United States, it is best to operate according to the method on the instructions, because different models of the United States air conditioning in the disassembly process also have certain differences. Of course, if you want to repair air conditioning, it is best to ask professional maintenance personnel to operate, so as to ensure the service life of air conditioning, as well as maintenance effect. In addition, when using air conditioning, we must pay attention to the maintenance and protection of air conditioning, in order to extend the service life of air conditioning, and the use effect of air conditioning.
Midea air conditioning disassembly method and how to clean
