Why is the mirror afraid of moisture? The mirror glass is generally cut before it is used. Water steam is easy to enter the mirror from the side of the glass knife cutting, corrosion mirror, mildew, rust spots. Therefore, you might as well buy a mirror, first on the side of the mirror with a coat of paint, at the same time on the back of a coat. The following is a small collection of mirror wiping methods.
Bathroom between the maintenance of the mirror secret
1, do not touch the mirror with wet hands, do not wipe the mirror with a wet cloth, to avoid increasing moisture pour into;
2, the mirror can not contact salt, grease and acid substances, these substances are easy to corrode the mirror;
3. The mirror should be wiped with a soft dry cloth or cotton to prevent the mirror from being wiped;
4, can use a soft cloth or emery cloth, dipped in some kerosene or wax wipe;
5. Wipe the mirror and frame with a cloth dipped in milk to make it clear and bright;
6. Before taking a bath, soap can be applied to the mirror, and then wiped with a dry cloth to form a layer of soap liquid film on the mirror, which can prevent the mirror from blurring;
7, with a dry cloth dipped in the right amount of detergent smears on the mirror, evenly spread. The active ingredients contained in dishwashing spirit can effectively prevent the condensation of water steam on the mirror surface and play a good anti-fog role;
8, you can also use astringent toner or dishwashing liquid;
9, with the oil absorption paper wipe, the effect is good.
At present, there are anti-fog mirrors on the market for sale, mainly coated anti-fog mirrors and electric anti-fog mirrors. The former prevents the fog layer by coating micropores; The latter through electric heating to make the mirror humidity rise, the rapid evaporation of fog, so as to form a fog layer, the value of this kind of mirror is very expensive.
