Now many families or that kind of old-fashioned card buckle toilet seat, this kind of toilet seat is fixed with the card buckle, so it will not be as stable as the screw fixed for a long time. If the buckle is loose, or even fall off, the toilet seat will be easy to fall off, affecting the normal use. At this time, we can remove it and tighten it again.
1, old buckle toilet seat cover disassembly diagram
A snap-in toilet seat is connected to the toilet by a snap-in and usually has a button on either side of the rear bottom of the toilet seat. Press the button and lift the lid off the toilet seat. Installation is the same, but in the opposite direction. Hold down the side button, align the toilet seat with the seat ring and corresponding hole, and press down. Usually, you will hear a click, indicating that the installation is complete.
2, buckle toilet seat cover off how to install
This is generally the problem of the buckle loose, you can see whether the buckle on both sides is bad, if it is broken, it will be replaced with the whole toilet lid, not broken then reinstall the buckle, and then install the toilet lid. If the fixed buckle is still a little loose, we can use such things as white cement or plasticine to paint on the buckle, play a fixed role, such as solidification will be very strong, the buckle is not easy to fall off. Then align the buckle with the mounting hole, install the toilet seat cover, and fix the side screws with nuts.
3. How does an old-fashioned toilet save water
Unlike modern toilets, which can adjust the water level, it is easy to use more each time you flush and store water. We can have a large bottle filled with water. Open the tank, then put the water bottle in it and cover the tank. This filled bottle can occupy a large part of the volume of the tank, equivalent to each flush saves the amount of a bottle of water, thus reducing the water storage, to achieve the purpose of saving water.
