For the old neighborhood, the most common phenomenon is the water pressure is small, due to the small water pressure on the water can not come up, especially in winter, the bath is very inconvenient. So, what about the old neighborhood water pressure is small? Let’s see what solutions there are!
A small water pressure in the old neighborhood how to do
Method 1: The facilities in the old neighborhood are relatively outdated, the higher the floor, the lower the water pressure, for which the most fundamental solution is to contact the property, water company or city government and other relevant departments for maintenance, such as unified installation of high-power booster pump or to adjust the parameters will increase the water pressure.
Method 2: You can also install a booster pump on the inlet water pipe, but this method is only temporary, not permanent, because if each household is equipped with a booster pump, in the long run, there will be different levels of water consumption, resulting in low water pressure, still no improvement.
Second, how to solve the problem of water pressure in old neighborhoods
1, if the water pressure instability, only involves a building of individual phenomena, you can miss the morning, noon and evening water peak, use the water heater, washing machine, or put water. That can alleviate the problem of its unstable water pressure.
2, if the overall water pressure is unstable, you should consider the source of water supply, whether there are not enough problems, affecting the effect of pressurization. You can also ask the water company’s professional and technical personnel, site visits, testing, and jointly discuss or solve the problem of insufficient water supply, or pressure.
3, if the configuration of the booster pump function is low, the water supply head is not enough, you should consider re-matching the booster pump, but also to solve the problem of unstable water pressure.
4, if only individual high floor users, the problem of unstable water pressure, depending on their specific circumstances, optional family-type automatic pressurization pump, can also solve the problem of unstable water pressure.
Third, the normal water pressure in the community is how much
The national regulations on water pressure are as follows (water supply specifications): the pressure of rural water supply services is 0.14 MPa, in line with the requirements of the Ministry of Construction pipe network water supply pressure service specifications. This pressure can only guarantee water supply to the third and fourth floors. The water supply above the fourth floor falls under the scope of secondary water supply.
In general, the current average pressure of the pipe network in rural areas is above 0.30 MPa, which is much higher than the national standard and can basically meet the water pressure requirements of 6-story users. However, from the point of view of safe operation, individual users located on the 6th floor or higher are located due to their geographical location. If the water pressure of the public water supply pipeline can not meet the requirements of users, it is necessary to increase the secondary water supply facilities.
