Paint bucket is a prop often encountered in the renovation, if your home latex paint cracked or need to be flushed, you can buy latex paint operation yourself. So, how do you do not open the paint bucket? In fact, it is because we have not mastered the most correct method, take a look at the answers provided by the fun ding common sense!
Paint bucket can not open how to do
Can not open because the paint can not be a lot of contact with the air (to prevent oxidation generally have a special pry bar, outside the air pressure inside the air pressure is very small of course is not easy to open, affecting the quality) all is sealed, the principle is to open a small mouth to let the air into it is easy to open.
The fastest way to open the lid of a paint bucket
1, use a screwdriver to loosen the lid of the paint bucket under the card mouth. Make sure you only pry half, not all.
2, then the lid break open 45 degrees, the lid is generally sealed under the rubber gasket, will not break open, this is the key to ensure the seal, the better the seal, the longer the preservation time.
3, if the lid is difficult to open, you can use a screwdriver, pliers and other tools.
How to wash the paint bucket clean
Method one:The ratio of banana water and water 1 to 1, pour into the paint bucket, clean with a rag, you can quickly clean in the paint bucket, and then use water more than twice to clear.
Method two: you can use gasoline to clean the paint bucket, use it with care to avoid the use of fire, and then wash it again with soapy water, and finally clean it with water.
Method three: use cotton lint soaked rosin, wipe in the paint bucket, wipe out and then clean with soapy water.
