HOMENews

Paint painting process Paint painting precautions

Paint painting process Paint painting precautions

2023-04-14 09:04:59

With the progress of our home improvement industry, many families are choosing to paint and thus paint is an indispensable material in home improvement, however, home painting is a technical job that requires the cooperation of many aspects in order to achieve the desired standard. There are so many convenient and quick tips in the process of decorating and painting, below we will introduce you to paint painting precautions.

1、Surface treatment before painting

The most important reason for the failure of paint painting is the lack of proper surface treatment before painting. According to the different conditions of the painted surface, surface treatment can include: cleaning, repair, patching, sanding, masking and priming.

2、The use of primer

To get the best painting effect, some surfaces should be primed before painting. The following are some of the reasons why primer is often needed: to fill and seal pores in wood or open plaster wall surfaces; to apply top coat, especially smooth and flat surfaces that need to be painted with enamel paint, etc.

3、The amount of paint

In addition to choosing the right product and color, you also need to estimate the amount of paint needed. This requires calculating the area to be painted and then dividing it by the approximate coating rate of the paint you are using. In most cases, it is best to have slightly more paint on hand so that you don’t have to go out and restock again halfway through the job.

4、Preparation of interior wall painting area

Move small pieces of furniture, curtains and photos out of the way and cover large items and floors with coverings; when painting, especially when using alkyd and oil-based paints, open doors and windows to allow air circulation.

5、Preparation of exterior wall painting area

Cover and tie up the shrubs, flowers and plants near the surface to be painted; spread useless cloths on the ground to prevent the paint from spilling out.

6、Cleaning of the painted surface

Dirt, dust, mold and oil stains on the surface to be painted must be removed to enhance the adhesion of the paint. The following places should be checked: when painting the interior walls, check the kitchen (especially around the stove and washing basin), the ceiling, around the cold air outlet, the bathroom and the corners, around the switches;

The above is the relevant introduction we bring to you today, I believe that friends also have a certain understanding, I hope this article can help you oh. You can also log on to Fowl Home to view the subscription for more related content and information.