Kitchen bathroom must be paved with floor tiles, and sometimes the living room also needs to be paved with floor tiles, so the choice of floor rotation is very important. A good floor tile determines the beauty and quality of the whole home decoration. Let’s take a look at the small trick to buy floor tiles.
As usual, it is recommended that the space with an area of less than 40 square meters be paved. The floor tiles of 600*600mm or the following specifications are selected. The space of more than 40 square meters is usually recommended to use the specifications of 800*800mm. For floor coverings in small Spaces, such as kitchens and bathrooms, choose 300*300mm or below. Such a design is reasonable and can highlight the beauty of the space, but also to prevent repeated purchases caused by waste.
Diagonally compared to size, overlap two bricks of a uniform variety facing each other, align the corners, and turn one of them so that the dimensions are always the same. This method is especially suitable for the detection of slippery tiles outside.
Check the flatness, overlap the two brick faces of the same variety together, align the four corners, turn one of them, easy to turn the quality is poor, vice versa. This method cannot be used to detect antique bricks. The distinctive feature of antique brick is the casual change of color and pattern on the outside, and the outside can be uneven.
The lower the water absorption rate of wall brick is not the better, many people think that the higher water absorption rate of ceramic tile is easier to water absorption, after cold contraction and thermal expansion will lead to the ceramic tile outside cracking and the whole tile peeling off, however, the lower the water absorption rate, the better is divided into the situation. For the wall brick, a certain water absorption rate is needed to ensure that the use of cement mortar paving to reduce the hollow rate of the wall brick, paving firmly. When paving, we must ensure that the wall brick soaking time is enough, 2-4 hours is appropriate.
Look at the finish, which is a main index to test the quality of polished brick. The precious wax on the outside of the polished brick is washed and cleaned with a soft cloth or reagent, and placed under the light or sunlight at an Angle of 45 degrees. The brighter the outside, the better.
The more delicate the ceramic tile particles, the higher the strength. The strength of ceramic tile is related to its bearing and flexural property, and the strength depends on its density. In the selection of ceramic tile, for the bathroom and kitchen floor tile, you can identify the rugged strength of ceramic tile by viewing the exquisite level of the particle behind the tile. As usual, the more exquisite the ceramic tile particle, the higher the density, the higher the damage strength.
