At present, many home bathrooms and toilets are combined into one, in many cases, if someone wants to take a bath, someone wants to go to the toilet, it is very inconvenient, at this time to install bath partition is a more reasonable choice. This can create a relatively independent bathing space to avoid mutual influence and facilitate daily life. What are the precautions for the installation of bath partition? Follow Xiaobian to learn about it.
1, shower partition size of the embedded hole position should be designed before the toilet decoration.
2, has installed the water supply system and ceramic tile had better custom shower room.
3. Wiring leakage protection switch device should be considered before installation in the shower room to avoid rework.
4, the style of bath partition depends on the layout of the toilet, the common corner type and a font.
5, the installation of the bath room should be strictly in accordance with the assembly process.
6, the shower partition must be firmly connected with the building structure, can not shake.
7, open shower partition must use expansion bolts, and non-hollow wall fixed, drainage, the bottom basin memory water is not more than 500 grams.
8. The appearance of bath partition after installation needs to be clean and bright, the sliding door and the sliding door are parallel or vertical, symmetrical, the sliding door should be opened and closed smoothly, no gap, no seepage, the shower room and the bottom basin with silicone seal seal.
In order to take a bath in winter, we will install a heater or bath bar for the bathroom. If it is a side-hanging device, it is best not to put it in the shower room or near the shower room glass to prevent moisture. If hanging on the top, it depends on the size of the bathroom, small space heating equipment in the middle of the line, not necessarily in the shower area, if the space is relatively large, you can put it in the middle of the shower area, as far as possible not to shower, shower room glass, otherwise not only can not achieve good heating effect, but also easy to cause product aging or self-explosion.
Bath partition although we can have an independent bath space, but we should also pay attention to the installation, such as the height of the bath partition should not be high to the ceiling, because it affects the exhaust. As long as you install it properly, you can still have a perfect shower partition and enjoy comfort.
