I believe everyone should understand that bathroom decoration is very complicated. Although the bathroom space is not large, it involves many details, such as water and electricity, waterproof, ceiling, etc. If some small places are ignored, the comfort and safety of the bathroom will be greatly affected. Discount, so it is easy to greatly reduce the quality of home life in the future, let me share with you the precautions for bathroom decoration, and see what to pay attention to.
First, the small details of bathroom decoration
There are many details in the construction of bathroom decoration. Thresholds, waterproofing, floor tiles, circuits, walls, and floor drains are all very important places. This kind of small construction skills is conducive to better achieving your own decoration effect.
Second, the bathroom threshold construction skills
The threshold is the first pass for the shower room to enter the house. It has the effect of waterproofing and separating the range in the bathroom. It also has the meaning of making money in Chinese Feng Shui. The key points of the construction design of the threshold are: first, the top of the threshold should be carefully inclined toward the inside of the bathroom, so that water droplets can flow smoothly to the floor drain in the shower room.
The second key point of the threshold construction is to have the same width as the door panel, and the door panel must be at the same height as the wall. This size can be the same when laying floor tiles, which is quite effective in preventing shower room breaches.
Three, bathroom floor waterproof construction skills
Nowadays, the raw materials used for ground waterproofing are mainly waterproof agents. When laying the moisture-proof layer for bathrooms, it must be laid 22 cm above the wall. The depth of the moisture-proof layer should not be less than the depth of the threshold.
When the pipeline is pre-stored on the ground, the moisture-proof layer should keep the pre-stored pipe. After the moisture-proof layer is done and the bathroom is dry, it should be primed with cement mortar immediately to prevent the moisture-proof layer from cracking.
Fourth, the small details of laying floor tiles
When laying floor tiles, be careful that the joints of the floor tiles are the same thickness, and must be aligned with the tile joints; It may be pasted to the bottom of the wall first, and then the polished crystal bricks shall be pasted on the bottom to avoid cracks.
5. Small details of bathroom circuit laying
The circuit joint of the toilet should be hung with tin, and it must be wrapped with waterproof tape and insulating tape to ensure safety and prevent leakage. Therefore, the circuit body must be replaced with a flame-retardant tube, and the switch and socket should be provided with moisture-proof boxes as much as possible, or placed in a dry area.
