After the bathtub is purchased, installation is another problem. Let’s learn how to install the bathtub together, so that it can be used at any time when needed in the future.
Don’t worry about the installation and construction of sanitary ware, see the installation details of the bathtub
Bathtub placement form: freestanding and embedded
For bathtub installation, first of all, you need to understand the form of bathtub placement. Generally, there are two types of bathtub placement: independent and embedded. The shelving type means placing the bathtub directly on the bathroom floor. This method is convenient for construction and easy to maintain, and is suitable for use when the floor has been decorated. Embedded is to embed all or part of the bathtub into the countertop. Compared with the embedded bathtub, it is easy and convenient to enter and exit, and is suitable for the weak.
Freestanding bathtub installation points
Freestanding bathtubs are easier to install. Among them, the installation of the water inlet and outlet is the key issue. Before installation, it is necessary to reserve or modify the bathtub outlet and other channels, then place the bathtub on two wooden bars, connect the upper and lower water, try to fill the bathtub with water, and check whether the water leaks. If there is no leakage, the wooden strip can be taken out. The bathtub is basically installed.
Embedded bathtub installation points
Embedded bathtub installation focuses on waterproofing. The main steps are as follows: after the tubing is finished, in order to achieve the waterproof effect, the slotted parts must be repaired. It is best to check whether there will be water leakage within a day or two; lay the floor in a normal order; use foam brick pads A good built-in bathtub, the height is generally within 60cm; pay attention to prepare 250cm at the position of the downpipe
