The final finishing stage of home decoration is the installation process of sanitary ware. Many people think that this is a matter of the decoration company and has nothing to do with the owner. In fact, it is not. Even if the decoration is about to be completed, it cannot be taken lightly. The owner, as a user of the new home, must carefully monitor the entire decoration process to ensure the completion of the decoration. Then there are three major matters that must be paid attention to during the installation of sanitary ware. The editor will introduce them in detail today.
1. Installation schedule
Generally, the products installed by the merchant are carried out after the foundation construction is completed. What the owner needs to do is to select the brand of the merchant in advance, and then make an appointment for the installation time. If the products are not from the same merchant, it is best not to choose the same The installation can be carried out every day, and the order can be arranged according to the actual situation. Of course, the installation can be carried out at the same time without affecting each other.
2. Avoid destructive installation
Don’t worry about the products directly installed by the manufacturer. It is best to do a good job of supervision during installation to avoid destructive installation. Before installation, you should take protective measures for the surrounding area, such as laying protective cardboard on the floor. Avoid scratching the wall during transportation, and avoid cracks on the wall and ground caused by improper operation during installation.
3. Installation supervision details
1. Cabinet installation details
Protective measures should be taken when cabinet boards enter the market. The general installation is to assemble the cabinet first, then place and install the cabinet, and then install the countertop and hardware. If holes are required on the wall, it should be shown to the installer in advance. Compare the water and electricity diagrams to avoid damage to the water and electricity pipes due to drilling. When installing the table and hardware accessories, you must pay special attention to see if the gaps on the table are reasonable and whether there are scratches on the surface.
2. Flooring details
When laying the floor, the most important thing is to do a good job in the treatment of the base layer. It is necessary to ensure that the base layer is flat and the dry humidity is moderate. During the installation process, it is necessary to check whether the installation workers have intentional wear and tear.
3. Hardware installation details
During the installation process, there will be many small hardware accessories, such as towel racks and storage racks. Many of these small accessories are installed by the installers. It should be noted here that the places that need to be punched on the wall must be careful Check the drawings of the water circuit to avoid damage to the water and electricity pipelines caused by punching holes.
4. Pay attention to installation and acceptance
It is also necessary to check and accept after the overall installation is completed. It depends on whether the product is firm, whether there are scratches, whether the connection is tight, etc. If any damage is found, it must be proposed and discussed in person.
