First, shower cleaning tips
1. Use embroidery needles and vinegar
The shower nozzle diverts the water column from multiple water outlet holes, reducing the impact on the skin and achieving a massage effect. When cleaning, you can use small objects around you, such as sewing needles. The needle is inserted into each water outlet hole one by one to make the scale fall off from the inner wall of the water outlet hole, and then the water is injected into the nozzle from the water inlet, and the water is poured out after shaking and cleaning, so that the scale can be fully cleaned. This method described above does not require too complex tools, the more troublesome point is to clean one by one.
2. Soak
Choose a container that can put down the nozzle, pour a weak acid such as white vinegar, toilet cleaner or special limescale cleaner, put the end of the nozzle water into the soak for a period of time (3-4 hours is appropriate), brush with a small toothbrush or other clean brush, and then rinse with water. One thing to be careful of with this method is to choose a weak acid rather than a strong acid. The general surface layer of the nozzle has electroplating, or other parts are metal materials, and strong acids will cause corrosion to the nozzle.
3. Wipe off the scale
After flushing with water, wipe clean the scale around and on the surface of the water outlet hole with a rag, and meet more “stubborn” sediment, do not use a needle, scrape with your nails until it falls off, and then clean with a rag. Of course, in order to maintain a long service life, only pay attention to the shower nozzle cleaning is not enough, especially for the nozzle of the electroplating surface, but also for daily maintenance: after use, often wipe with a clean soft cloth (it is best to dip a little flour to wipe the surface), so that the surface is smooth as new.
Second, how to maintain the shower
1. Scale removal
Every once in a while, it is necessary to clean the shower after disassembly. The surface and interior of the shower can be irrigated with vinegar and soaked for a few hours. Then, the surface outlet nozzle is gently wiped with a rag, and the joint is re-loaded after the water is discharged.
2, faucet plating surface maintenance
Use cotton cloth dipped in a small amount of flour, wipe the electroplating surface of the product, and then rinse with water, so that the surface is restored as new.
It can be seen that the shower must pay attention to cleaning skills in daily life, such as the use of small objects around you when cleaning, such as sewing needles. The needle is inserted into each water outlet hole one by one to make the scale fall off from the inner wall of the water outlet hole, and then the water is injected into the nozzle from the water inlet, and the water is poured out after shaking and cleaning, so that the scale can be fully cleaned.
