First, how to clean the shower head
1, manual cleaning
Remove the mesh cover parts at the head of the shower, clean with a brush, and then put back in place. Some brands of showers are equipped with special shower head opening tools when they are sold, which is convenient for consumers to clean and use.
2, hand wipe cleaning
The water outlet hole of this kind of shower is made of rubber particles, which is very soft and comfortable. Just rub the rubber particles with your fingers, you can easily crumple the scale and pop it out. It is now a more popular cleaning method on the market.
3, automatic cleaning
There is also a cleaning needle placed inside the shower, and the cleaning needle will move the scale out when the water is converted, which is very worrying and labor-saving. It is recommended that the shower with automatic cleaning function at home, it is best to remove the shower every six months and soak in white vinegar for 4-6 hours, which can not only eliminate the scale in the shower, but also play a certain bactericidal role.
Second, how to disassemble and install the shower head
1. Find the connector first
When installing the shower head, the first thing to do is to find the threaded copper joints, then wrap the two in a plastic bag, and then connect the reserved pipe joints properly. It should be noted here that the eccentric joint installation should be controlled at a distance of about 15 cm, and then the installation height of the shower head should be determined.
2. Install eccentric joints
When installing the nozzle, it must be installed on the fixed seat of the eccentric joint, if the position is not on the eccentric joint, it is necessary to adjust the eccentric joint, and pay attention to the sealing washer between the nut behind the faucet and the eccentric joint.
3, use skills to install
After installing the faucet, then install the shower head on the top bend of the shower rod, and ensure its stability, and then use a stainless steel hose to connect the faucet and shower, after completion, see if it will leak, no water is complete.
It can be seen that the disassembly and installation of the shower head need to pay attention to the steps and then use the skills, remember to read the instructions. In addition, there are many cleaning methods for the shower head, and people can choose the proper cleaning method according to the reasons for the blockage of the shower head.
