First, what are the precautions for shower head installation
1. Determine the installation height of the shower head
Shower is mainly divided into dark shower and light shower. The installation height of the hidden shower is that the center of the wall buried water outlet should be 2.1 meters from the ground, and the center of the shower switch should be 1.1 meters from the ground; The bright shower is generally defined by the water surface of the shower, and the installation height of the shower is preferably 2 meters from the ground. The actual installation is adjusted according to the height of the family.
2, protect the faucet and other hardware
When tightening the faucet, a careful person will use a thick cloth or plastic film to wrap the screw cap of the faucet to prevent the faucet from being spanner.
3. Pay attention to the internal structure of the wall
The location of the waterway and circuit should be marked on the wall to avoid breaking the water pipe when drilling.
4, determine the hole distance and height of hot and cold water
The cold and hot water center hole distance of the shower faucet on the general market is 15 cm, and there will be two S joints inside, which can properly adjust the distance, and the error can not exceed 1 cm.
5, pay attention to clean up after installation
In the installation process will inevitably produce some dusty dust, should be cleaned after the completion of the installation work, especially the newly renovated pipe inside the impurities are more, do not clean the pipe will affect the water effect. Make sure the site is clean and rinse it with water.
Second, shower disassembly should pay attention to what
1. There is a small screen inside the sprinkler nozzle, the sprinkler has been used for a long time, the impurities in the water are easy to deposit on the small screen, if the water quality is not good, it is also easy to form scale on the small screen, which leads to the blockage of the sprinkler head, it is necessary to open the sprinkler head to clean, but how to open the sprinkler head?
2, there are too many types of shower head, the method of opening the shower head depends on the specific structure of the nozzle, most of them only need to use the hand to spin in the counterclockwise direction can be removed, do not need to use tools. Most of the basic components of the shower include the threaded joint, the body, the surface cover, the water sleeve, the screw cover, the control ring and other external structures and the screen, the screen frame, the water dish, the impeller, the water jet dish, the water distribution plate and other internal structures. In simple terms, it is composed of nothing more than the water cover and handle, if it is a shower head that can adjust the size of the water, there should be a software circle in the middle, hold it firmly, and then rotate counterclockwise (or clockwise), it should be able to rotate open. If it is not adjustable to the size of the water shower head, it can not be basically opened, because most of those are tightly welded with plastic welding.
3, if there is a small circular cover in the middle of the shower head, use a flat-head screwdriver to pry open the small cover, you can see the screw, see what the screw is, and use the corresponding screwdriver to open the shower head. Generally speaking, as long as it is not a one-time shower, it can be opened, and think about its structure, the shower head should not be too difficult to open.
It can be seen that the shower installation needs to pay attention to related matters, such as the shower is mainly divided into dark shower and bright shower. The installation height of the hidden shower is that the center of the wall buried water outlet should be 2.1 meters from the ground, and the center of the shower switch should be 1.1 meters from the ground; The bright shower is generally defined by the water surface of the shower, and the installation height of the shower is preferably 2 meters from the ground.
