The shower is now an inseparable bathing appliance in our daily life, and it is used almost every day. Today, let me talk to you about the details that should be paid attention to in the installation of showers and the maintenance methods of showers.
Pay attention to the details of shower installation
1. The shower should be installed according to the actual needs of the owner: when determining the installation height of the shower, the installer will determine the most suitable height according to the owner’s on-site trial situation, so as to facilitate the owner’s future use.
2. Hole distance and height of hot and cold water: Generally, the center hole distance of hot and cold water of shower faucets on the market is 15 cm, and there are two S connectors inside, which can adjust the distance appropriately, and the error should not exceed 1 cm. The height of the hot and cold water must be the same height. Use a spirit level to measure whether the faucet is installed level.
3. Protect the faucet with cloth: When tightening the faucet, careful people will wrap the screw cap of the faucet with thicker cloth or plastic film to prevent the faucet from being messed up by the wrench.
4. Before installation, it is best to put the water in the pipeline and rinse the pipeline. Because there are a lot of impurities in the newly renovated pipes, even a lot of fine sand, if you install them and use the shower directly to discharge water, these impurities may directly go to the inside of the shower, and some of them are not easy to clean, affecting the water output of the shower Effect.
5. Clean up the dust on the site after the installation: some dust and dust will inevitably be generated during the installation process. After the installation work is completed, it should be cleaned up to ensure that the site is clean and rinsed with water.
Shower maintenance method
Scale removal: After the shower has been used for a period of time, some scale is likely to accumulate, resulting in poor water flow or disordered water flow. Scale cleaning is an unavoidable task for the shower head. According to the different functions of the shower head, it can be divided into the following categories:
a: Manual cleaning: The net cover at the shower head or other parts that absorb scale need to be removed, cleaned with a brush and then put back to the original place. Some brands of showers are equipped with a special shower head opening tool when they are sold, which is convenient for consumers to use.
b: Hand-wiping cleaning: The outlet hole of this type of shower is designed with rubber particles. The rubber material is soft and comfortable to the touch, and it is not easy to scale. It is easy to clean. Just wipe the rubber particles lightly with your fingers to easily crush the scale ,pop up. This cleaning method makes good use of the characteristics of the material and is a popular cleaning method on the market today.
c: Automatic cleaning: Due to the special structure of certain types of showers, the scale will be automatically cleaned out during use. For example, some shower heads have cleaning needles inside. When the water outlet mode is switched, the cleaning needles will pop out automatically to remove the scale.
What needs to be reminded here is that even if your shower head has an automatic cleaning function, it is best to open the shower head after using it for a long time for a comprehensive and thorough manual cleaning to give your shower head the most careful maintenance. Every six months or less, remove the shower and place it in a small basin, water the surface and interior of the shower with edible white vinegar and soak for 4-6 hours, then gently wipe the spout on the surface of the shower with a cotton rag : After reinstalling the connector, let the water flow for a while, wait for the white vinegar and scale to flow out with the water, so as to eliminate or reduce the impact of scale on the shower, and have a certain bactericidal effect.
