The shower is one of the necessary products in the modern bathroom, and the hand shower is also one of the most frequently used products in our daily life. Usually, the shower we use will produce a certain amount of scale and impurities inside the shower due to the long-term water flow. Then we have to learn how to maintain the shower. Mastering the maintenance skills of the shower can make the shower last longer. Let’s follow the editor to understand how to maintain the shower and the correct way to maintain the shower.
1. Scale removal: every six months or less, remove the shower head and place it in a small basin, water the surface and interior of the shower head with edible white vinegar and soak for 4-6 hours, then gently wipe it with a cotton rag Spout on the surface of the shower: After reinstalling the connector, let the water flow for a while, and wait for the white vinegar and scale to flow out with the water, so as to eliminate or reduce the impact of the scale on the shower, and have a certain bactericidal effect.
2. Maintenance of the electroplating surface of the faucet: often wipe the electroplating surface of the shower with a soft cloth sticking a little flour, and then rinse with clean water to make the surface of the shower as bright as new.
Precautions: ①. Please pay attention to yourself and the safety of the product when disassembling and assembling the shower; ②. Do not use filter gaskets that are too large or too fine. Flow rate, the specification of the filter screen is preferably 40-60 mesh.
3. Do not use strong acid when removing scale, so as not to cause corrosion to the surface of the shower.
4. Do not disassemble the shower for maintenance by yourself. Improper disassembly will cause damage to the appearance and internal structure of the product.
5. The ambient temperature of the shower should not exceed 70°C. High temperature and ultraviolet light will greatly accelerate the aging of the shower head and shorten the service life of the shower head. Therefore, the shower head should be installed as far as possible away from electrical heat sources such as Yuba. The shower cannot be installed directly under the Yuba, and the distance should be more than 60CM.
