Now many families have also begun to use the shower room, out of the previous toilet bathing era, so when we want to install the shower room, what are the installation points that need to pay attention to? Next, please follow the footsteps of Xiaobian to understand the shower room installation method and shower room purchase guide. Check it out with PChouse.
First, the shower room installation method
1. Get the necessary tools.
2. Install the bottom basin: combine the parts of the bottom basin, adjust the level of the bottom basin, and ensure that there is no water in the basin and the bottom. The hose can be extended with the distance, and the basin floor is firmly connected to the drain.
3, test, protection: after installation, it is necessary to test the water to ensure that the water is unimpeded. Use a pencil and a level to determine the drilling position of the aluminum material against the wall, and use a hammer drill to drill holes.
4, Install aluminum: in the drilling place to knock rubber particles, with screws to lock the aluminum strip on the wall.
5, fixed glass: the glass clamp locked in the bottom basin drilling, and then fixed with screws.
6, Install pipe jacking: find the appropriate position above the fixed glass drilling, install (straight/diagonal) fixed seat and connect the pipe jacking. Fix it to the top of the glass with a bend sleeve.
7. Install storage rack: Install the storage rack in the correct position, tighten the nut of the laminate, fix the laminate glass, and keep it vertical and horizontal. Be careful to waterproof the glass under the aluminum.
8, Install the movable door: install the hardware of the movable door, and install the hinge in the fixed door reservation hole. After installation, adjust the position of the lotus leaf core until the door feels best.
9, do a good job of waterproof: according to the requirements on the side of the glass or below the installation of suction strip or water blocking tape. Use silicone to close the joints between aluminum and wall, glass and bottom basin.
10, debugging, fastening: check whether the use of each part is comfortable and smooth, find problems should be adjusted in time. After the adjustment, tighten the corresponding screws to make the whole shower room more firm.
11, finishing work: the decorative aluminum strip card into the wall aluminum, to ensure that its appearance is clean and generous. Finally, the whole shower room needs to be wiped clean with a rag.
Second, shower room purchase strategy
1. Glass quality is important
For a glass shower room, its quality is the most important.
First of all, we must see whether the glass is transparent, there are no impurities, and the defects of bubbles, because of the process defects or the problem of impure materials, there will always be such defects, and we should pay attention to whether the glass chamfer is smooth and whether the edge is damaged.
Secondly, it is necessary to see whether there is a 3C certification mark on the glass plate, the 3C mark must be fired on the glass, it cannot be labeled, and there is a sequence of factory codes below.
The tempered glass of the shower room is common in 4mm, 6mm, 8mm, 10mm and other specifications, and generally speaking, the tempered glass with a thickness of 6-8mm is the most suitable.
(4) explosion-proof glass is a layer of glue between two layers of glass, there will be no debris after cracking, but tempered glass does not have this function, according to the provisions of tempered glass per 50*50mm area to reach more than 40 pieces.
2. The hardness of aluminum can not be less
The frame of the shower room must be hard enough, and the load bearing must be good enough.
① Aluminum hardness, in order to be able to bear dozens of kilograms of glass weight, the qualified shower room aluminum thickness should be more than 1.2mm, the shower room frame installed on the rail hanging glass should be more than 1.5mm, and the hardness should be more than 13 degrees.
Secondly, it is necessary to see whether the surface of the aluminum is smooth and flat, and whether there is color difference and trachoma
3. Pulley materials should be noted
The pulley is the most frequently used hardware in the shower room, so the quality and tightness of the pulley material are very important.
① First of all, the wheel seat of the pulley should be resistant to pressure and weight, the best is made of 304 stainless steel, high-end synthetic materials, etc. The seal of the wheel seat is better, so that water vapor can not enter, in order to make the wheel smooth.
Secondly, it is necessary to see that the pulley and track need to be closely matched, the gap is small, and it is not easy to fall off, so as to avoid falling off and injuring people.
4. The wall clip should prevent self-explosion
The wall clamp is the hardware connecting the shower room and the wall. The tilt of the wall and the offset of the installation will distort the glass connecting the wall, resulting in the glass self-explosion.
Therefore, the wall clip should have the adjustment function of vertical and horizontal direction, which can make the aluminum material match the distortion of the wall and the installation, eliminate the distortion of the glass, and avoid the self-explosion of the glass.
5. Look at the stability of the rod in the shower room
First of all, the shower room tie rod is divided into: loop tie rod, straight tie rod, diagonal tie rod
The shower bar is the support bar to ensure the stability of the shower room frame, which has an impact on the hardness and strength of the shower room, so we must pay attention to the use of flexible bar when purchasing.
6. Check the water tightness of the shower room
When purchasing the shower room water bar, be sure to test the quality of water tightness, not only near the water bar!
① Check whether there is water seepage between the shower room and the wall
② Water tightness at the hinge and sealing of the rubber strip and the rubber strip
③ Whether the connection between the shower room and the stone base and the bottom basin is sealed
④ After installing the water baffle strip, carry out the water leakage test
7. Design should be human
In addition to the above items, such as whether there is a boutique shelf, sealed magnetic strips, buffer devices, etc., these can provide you with a more comfortable and intimate bath experience design, which should be paid more attention to, and the threshold is too high will make the elderly with mobility difficulties, and children are more troublesome when they enter and leave.
8. Look at the certificate
The most important thing is not to buy those three no products, or unqualified products, so be sure to have three looks when buying:
① Look at the 3c certificate
② Check the quality inspection certificate
Look at the patent certificate
9. Eco-friendly materials are important
For the shower room of acrylic material, it should be noted that some of the glass wires in the composite acrylic plate contain formaldehyde. Acrylic plate is divided into pure acrylic plate and composite acrylic plate, its load-bearing and durability is not the same, but also need to pay attention to when buying.
10. Choose shower room according to room type
The shower room covers a small area, and the bathroom area can be installed as long as there are 3 to 5 square meters. The most common corner type shower room and a zigzag shower room are two, and the specific style to choose depends on the bathroom pattern. The corner shower room is installed in the corner area of the bathroom pattern, and the narrow and long bathroom should choose a zigzag shower room.
11. Although quality is important, installation is not sloppy
The installation of the shower room is also an important link to determine the quality of the shower room, if the installation is unbalanced, the force Angle of the glass is different, it will burst during use.
After reading this article about the shower room installation method explanation with the shower room purchase strategy, I hope to help you.
