The shape of the shower room is generally symmetrical arc fan, square, diamond shape and so on, there are sliding door, folding door, rotating shaft door, etc., in the way of entry, there are angular entry or single-side entry type, angular entry type is the biggest characteristic of can expand the use rate, can better use the limited bathroom area, square diagonal, arc shower, diamond shaped shower room are of this kind, is more applied style. Choose the shape of the shower room to refer to the size and direction of the bathroom.
Most people prefer to buy a translucent shower room, but the traditional conservative (like the elderly) will also accept cloth pattern opaque shower room, so it is up to the family preference.
The main material of the shower room is tempered glass, tempered glass quality difference is large, authentic tempered glass carefully look at the faint pattern.
Pay attention to the steam engine and computer control panel when purchasing a shower room with steam function. The core of this steam function is the steam engine, and if the steam engine is not good enough, it will not be long before it breaks down. In addition, the computer control board is the core of the shower room. Since all the function keys of the shower room are on the computer board, once the computer board is faulty, the whole shower room can not be used, so be sure to check the warranty time of the steam engine and computer board when buying.
The skeleton of the shower room is usually made of aluminum alloy, the surface is sprayed with plastic treatment, no rot, no rust. The main frame aluminum alloy thickness is better than 1.1mm, not easy to deformation. The ball bearings of the door must be flexible, easy to open and close, the screws are made of stainless steel, all hardware should pay attention to the smoothness, scratch inside is not fun.
The chassis of the shower room is divided into two kinds: high basin and low basin. With the cylinder type can sit people, suitable for the elderly or children’s families, but also can be used for laundry, water, etc., but the health trouble.
Low POTS are simpler and less expensive. Chassis texture divided into glass fiber, acrylic, steel stone three, the best fastness, dirt cleaning convenient. The board used in the shower room is mainly acrylic. It is said that the glass wire used in some composite acrylic board contains formaldehyde, which is easy to air pollution. Method is: if the back of the acrylic plate is different from the front, relatively rough, it belongs to the composite acrylic plate. For example, some acrylic plates will change color if used for a long time, and some will have small cracks. This is also the main reason why some brands of shower rooms are expensive and some are cheap.
Buy the shower room must be bought from the formal channels, to see the brand, can not covet the price is cheap, some of the brand is high-grade shower room, looks very beautiful, many functions, it is a 35 products, poor quality especially easy to rust, hot air can not be expelled, even the glass will burst.
Finally, let me emphasize this
Choose a shower room should consider the factors
① Do not covet cheap prices. Be sure to buy products with detailed manufacturing name, address and product certificate. In general, the quality of brand products purchased in large building materials supermarkets will be guaranteed.
The color pattern should be consistent with the bathroom decoration style. The shape of the shower room is generally divided into three categories: a zigzag, circular arc, diamond shape. Most consumers like transparent toughened glass shower room, the product itself and the surrounding environment collocation is strong, give a person clean and generous feeling, at the same time increase the permeability of the whole bathroom, if you choose toughened glass printing and other processes, will reduce the permeability of the bathroom, make the bathroom space appears smaller; But there are also some elderly or traditional people, fancy cloth pattern shower room, the appearance of cloth, more monotonous, but not transparent, the biggest advantage is that the family can use the bathroom at the same time when taking a bath. However, with the improvement of people’s quality of life, even those who can’t see to take a bath will not use the bathroom when someone is taking a bath in the bathroom, so this kind of glass surface treatment to make it opaque way has been few people choose.
③ Identify the material. The main material of the shower room is toughened glass, the quality of toughened glass is very different, there is a great safety risk of fake and inferior toughened glass, toughened glass from the outside to see no difference with ordinary glass, there are only two ways to distinguish toughened glass and ordinary glass: One is to see whether there is a 3C mark and brand trademark fired up on a corner of the glass. The other is to see whether the broken pieces are granular rather than flake after the glass is destroyed. The skeleton of the shower room is generally made of aluminum alloy, the surface of the electroplating treatment, no corrosion, no rust, but this way has fallen behind in the process, the main problem is that once the surface treatment wear off, aluminum alloy is oxidized white spots. Now many brands of shower rooms have been made of aluminum and titanium alloy frame, especially on the track, the main advantage is that aluminum and titanium alloy itself has anti-oxidation function, and can increase the bearing strength of pure aluminum; Another advantage of choosing aluminum and titanium alloy is that the surface can not do electroplating treatment, and use natural polishing treatment or wire drawing treatment, aesthetic is unique. The thickness of the upper track is better than 1.1mm. At present, the thickest shower room like Shanghai Anqi shower room WL-2608 has reached 3.8mm thick, and the door frame is not easy to deformation. At the same time, pay attention to check whether the ball bearings are flexible, whether the door opening and closing is convenient and lightweight, whether the frame combination is made of stainless steel screws.
④ Chassis selection. The shower room is divided into two kinds: high basin and low basin. With the cylinder type can sit people, suitable for the elderly or children’s families, but also can be used in a cylinder, laundry, water, etc., the deficiency is to make health trouble. In contrast, low POTS are compact and cost less than high POTS. In addition, consumers should choose a chassis with removable side panels for easy cleaning and to prevent stench.
Pay attention to the steam engine and computer control panel when purchasing a shower room with steam function. The core of this steam function is the steam engine, and if the steam engine is not good enough, it will not be long before it breaks down. In addition, the computer control board is the core of the shower room. Since all the function keys of the shower room are on the computer board, once the computer board is faulty, the whole shower room can not be used, so be sure to check the warranty time of the steam engine and computer board when buying.
At present, the board used in the shower room is mainly acrylic board. It is understood that the glass wire used in some composite acrylic board contains formaldehyde, which is one of the sources of pollution in the toilet. The way to distinguish acrylic material is to see the inside of the shower room, if the back of the acrylic plate is different from the front, relatively rough, it belongs to the composite acrylic plate. For example, some acrylic plates will change color if used for a long time, and some will have small cracks. This is also the main reason why some brands of shower rooms are expensive and some are cheap.
If you plan to choose the shower room, you must determine the model before the water and electricity transformation, and then reserve the upper and lower water positions required by the shower room. The power supply should also be kept well, and consider the problem of moisture resistance. The design of waterways and circuits should also consider the problem of future maintenance.
Pay attention to the installation, the shower room should be connected to the wall fixed, do not produce any shaking.
