Refrigerator, as our common electrical equipment, it can not only keep food fresh for us, but also use the refrigerator to make their favorite ice cream and some ice drinks. However, in the process of daily use, we should not only clean and maintain it often, but also check its operation. As a household appliance, it is also very normal to encounter some problems and failures occasionally. Today, Xiaobian is mainly for Siemens refrigerator, to introduce the method and relevant knowledge about alarm removal.
I. Siemens refrigerator alarm reasons:
1) Siemens refrigerator starts up for the first time or starts up after a long time of power failure;
2) Keep the freezer door open for a long time;
3) Put a large amount of food in the freezer at one time;
4) Air cooled refrigerator, when the refrigerator door is not good or the user opens the door for a long time will also produce an alarm.
5) The temperature controller of the refrigerator is not adjusted properly.
6) May display board procedures by external electromagnetic interference, as long as not frequent alarm should be no problem.
Two, Siemens refrigerator alarm solution:
Method of adjusting refrigerator temperature controller in winter and summer: Due to the large temperature difference between summer and winter, in order to save electricity and ensure the quality of food freezing, it is necessary to adjust the refrigerator temperature controller knob in summer and winter.
Temperature controller knob adjustment method: refrigerator temperature control knob is generally 0, 1, 2, 3, 4, 5, 6, 7 when the number is larger, the lower the temperature in the freezer. Generally, in spring and autumn, we put it on the third gear. It depends on your requirements. Can the freezer reach below minus 18 degrees? In order to keep food fresh and save electricity, we can shift to 1st or 2nd gear in summer and 4th or 5th gear in winter. Some people may ask, the winter temperature is low, but the temperature set low (thermostat value), the summer temperature is high, but the temperature set high (thermostat value is small), is it wrong? In fact, there are a lot of people have such a wrong understanding, that the winter temperature is low can set the refrigerator temperature high, summer temperature to set lower. If you can’t fix the problem, you can only call Siemens refrigerator repairman to fix it as soon as possible.
Iii. Precautions for the use of Siemens refrigerator
1. Placement
We should pay attention to whether the position of the refrigerator is reasonable and whether it is easy for the refrigerator to heat. But also need to check the power supply situation of the home, whether it is grounded, whether it is a dedicated line.
2. Read the instructions carefully
Before use, users should carefully read the attached product instructions and check the various parts of the refrigerator. The power supply used by household refrigerators is mostly 220V, 50Hz single-phase AC power supply. In normal operation, the voltage fluctuation is allowed between 187-242V. If the fluctuation is large or fluctuates, it will affect the normal operation of the compressor, or even burn the compressor.
3, electricity safety can not forget
Refrigerator should use single-phase three-hole socket, separate connection. Pay attention to protect the insulation layer of the power cord, do not stress the wire, do not change or extend the power cord at will.
4. Start after standing
After the check is correct, the refrigerator should stand for 2 to 6 hours before turning on, so as to avoid oil circuit failure (after handling the refrigerator). After the power is connected, carefully listen to whether the sound of the compressor is normal during startup and operation, and whether there is the sound of the pipes hitting each other. If the noise is too large, check whether the product is placed smoothly, whether each pipe is in contact, and make corresponding adjustments. If there is a large abnormal sound, should immediately cut off the power supply, contact professional repair personnel.
5, new machine running-in
Start with a lighter run because the moving parts of the new machine have a run-in process. After running for a while, add more. This will extend the life of the refrigerator.
6, the first operation to reduce load
When using the refrigerator for the first time, do not store too much food. Leave proper space to maintain the circulation of cold air. Try to avoid the refrigerator working at full capacity for a long time. Hot food should be cooled to room temperature before putting in, so as not to cause the refrigerator to stay open for a long time. Food should be sealed with plastic bags or plastic paper or put in airtight containers to prevent moisture, water loss and odor. Food with water should be removed after the water, so as not to form too much frost due to the evaporation of a lot of water. Please note that liquids and glassware should not be placed in the freezer in case of freezing damage. Do not put volatile, inflammable chemicals, corrosive acid and alkali into the refrigerator to avoid damage.
When we find that the refrigerator alarm can not be lifted, do not be nervous, keep calm, take a look at the reasons for the alarm of Siemens refrigerator and the relevant solutions sorted out by Xiaobian, according to the actual situation, try to analyze the situation, so as to find the relevant reasons, use the solution, I believe it will be solved soon. For refrigerators, there are a lot of common sense about life and related precautions, we should learn, and try to pay attention to.
