When it comes to bathroom decoration, everyone generally pays more attention to whether its functions are complete and whether the decoration is beautiful. But some basic decoration is very important, it directly determines the safety of our home, whether the decoration can be used for a long time, etc. How to decorate the bathroom well? What do we need to pay attention to? Let’s share with you the six aspects that need to be paid attention to in bathroom decoration, let’s take a look together.
bathroom design
Six aspects of bathroom decoration need attention
1. The bathroom wall is waterproof
Bathroom waterproofing is the most important issue, and it must be paid attention to when designing a home. If the white wall is completely unrecognizable by infiltrated water, it will not only cause economic loss, but also affect the quality of life. So how is the bathroom waterproof?
Before doing waterproofing, the ground must be cleaned up, and repeatedly painted with polyamic acid waterproof paint 2 to 3 times.
When the bathroom is bathed, water will splash on the adjacent wall. If there is no protection of the waterproof layer, the partition wall and the opposite corner wall are prone to moisture and mildew. Therefore, it is necessary to do a good job of waterproofing the wall before laying wall tiles. In general waterproofing, the wall should be waterproofed at a height of 30 cm, but for non-load-bearing light walls, the entire wall must be waterproofed, at least To be 1.8 meters high.
2. The water pipe groove in the bathroom wall is waterproof
This is a problem that is easily overlooked.
During the construction process, when pipes, floor drains, etc. pass through the floor, the waterproof layer around the holes must be carefully constructed. The water pipes are buried in the wall to achieve a reasonable layout. When laying water pipes, grooves larger than the diameter of the pipes must be made. The grooves are plastered and smooth, and then the grooves are painted with polyurethane waterproof paint.
bathroom design
3. Bathroom ventilation
Moisture tends to accumulate in bathrooms, so ventilation is especially critical. It is best to choose a Mingwei with windows. If it is a hidden guard, in order to prevent mold, hair growth, and damp bugs from crawling around, you can install a high-power and good-performance exhaust fan outside.
fashion bathroom
4. Bathroom light
When choosing bathroom lamps, you should choose lamps with soft light colors, which can make the bathroom look spacious and bright.
5. Bathroom tiles
For the choice of bathroom tiles, you can choose white or light-colored ones, do not choose black or dark-colored ones, especially for small-space bathrooms. Light colors can make the bathroom look spacious without making people feel cramped.
6. Bathroom floor drain
The height of the floor drain water seal must reach 50mm to prevent the air in the drainage pipe from flooding into the room. The floor drain should be about 10mm lower than the ground, and the drainage flow should not be too small, otherwise it will easily cause blockage. If the floor drain is very rough, it is easy to catch hair and sludge, causing blockage, and it is especially easy to breed bacteria. The opening diameter of the floor drain grate should be controlled between 6 and 8 mm, so as to effectively prevent hair, sludge, sand and other dirt from entering the floor drain.
