First, how to install smart toilet seat cover
1. First, separate the toilet lid and the toilet lid base. Find two hooks sticking out of the toilet seat where the lid is fixed, and tap them with your fingers to remove the cover and seat.
2, take a wrench, screwdriver and other things, find the screw, screw down. Screws are very easy to find, look for the base side of the toilet lid can be found, if not, reverse, from the reverse side of the toilet lid base to find, you need to squat down to see, after the screw down, you can take down the old toilet base.
3, next, take out the new toilet base and fixing bolts and nuts, attach the smart toilet seat base, find two holes to semi-fix it.
4, the smart toilet cover is aligned with the card slot, gently push into, hear similar to the sound of scraping is OK, and then adjust the position of the smart toilet cover before and after, so that it can adapt to the toilet, do not appear left to right, front to back. After determining the location of the smart toilet seat, remove the smart toilet seat again.
5, after that, the base of the smart toilet seat is completely fixed, and then the smart toilet seat is pushed into it again. After that, the water inlet valve at home will be temporarily turned off, the water in the toilet tank will be completely emptied, and then the wall water inlet valve will be replaced with a three-way water inlet valve dedicated to the smart toilet. Then the water inlet valve of the toilet tank and the water inlet valve of the smart toilet cover are linked to the three-way water valve dedicated to the smart toilet, remember to be firmly connected, and connect the power supply of the smart toilet cover.
6, the last step is to test the installation results, call the water inlet valve, turn on the power, try the function of the smart toilet lid, if there is no water leakage, the smart toilet lid function is operating normally, it means that the installation is successful.
Second, the use of smart toilet seat precautions
1, in use, pay attention to anti-electricity. For example, it is best not to “wash” the computer panel with water; For business trips or trips, unplug the smart toilet seat cover; Do not touch electrical outlets with wet hands; Connect the ground wire, etc., to take protective measures and always beware of leakage electric shock.
2. Always clean the nozzle. Many nozzles use stainless steel tubes with plastic tubes, which is easy to breed a lot of bacteria at the joints, which is also the reason why smart toilet seats are unsanitary. Some smart toilet seats use removable nano silver ion germicidal nozzle, which can ensure health and safety. In addition, most domestic water tanks are 80 ml, and the water volume is large, but the water that is repeatedly heated in the water tank may produce nitrates and bacteria, and pay attention to the nozzle often clean and ensure health when in use.
After the above introduction, everyone knows how to install a smart toilet seat? There are many precautions for the use of smart toilet seats, and we should pay more attention to them in daily life, so as not to affect the service life of smart toilet seats.
